Ti3Al matrix alloy refined and reinforced by in-situ synthesized SiCw/Nb4C3 core-shell structure

被引：5
作者：
Cui, Sen [1 ]
Cui, Chunxiang [1 ]
Kang, Licong [1 ]
Liu, Shuangjin [1 ]
机构：
[1] Hebei Univ Technol, Sch Mat Sci & Technol, Key Lab New Type Funct Mat Hebei Prov, 8,Rd 1, Tianjin 300130, Peoples R China
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2021年 / 860卷
基金：
中国国家自然科学基金;
关键词：
Intermetallics; Interface; Metal matrix composites; Microstructure; GAMMA-TIAL ALLOY; MECHANICAL-PROPERTIES; GRAIN-REFINEMENT; MICROSTRUCTURE; COMPOSITES; BEHAVIOR; INOCULANT; STRENGTH; ALUMINUM;
D O I：
10.1016/j.jallcom.2020.158423
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Hot deformation as a general fabrication method for Titanium-Aluminum alloy could enhance the mechanical properties due to the refining of grain size and lamellar width. Compared with the hot deformation method, here we report a casting strategy in which a Ti3Al matrix alloy was effectively reinforced by in situ ceramic particles meanwhile modified by inoculants. The average lamellar width is refined from about 3300 nm to about 37 nm. Samples exhibit an ultimate compressive strength of 2.76 GPa with a strain of 17.3%. SiC/Nb4C3 core-shell structure was observed in the interface between reinforcement and matrix, and its interface microstructure was studied in detail. (C) 2020 Elsevier B.V. All rights reserved.
引用
收藏
页数：10
相关论文
共 33 条
  • [11] Hot deformation behavior and deformation mechanism of two TiAl-Mo alloys during hot compression
    Jiang, Haitao
    Tian, Shiwei
    Guo, Wenqi
    Zhang, Guihua
    Zeng, Shangwu
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 719 : 104 - 111
  • [12] Tunable moire bands and strong correlations in small-twist-angle bilayer graphene
    Kim, Kyounghwan
    DaSilva, Ashley
    Huang, Shengqiang
    Fallahazad, Babak
    Larentis, Stefano
    Taniguchi, Takashi
    Watanabe, Kenji
    LeRoy, Brian J.
    MacDonald, Allan H.
    Tutuc, Emanuel
    [J]. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 2017, 114 (13) : 3364 - 3369
  • [13] Interfacial microstructure and nucleating mechanism of melt-spun CeB6/Al composite inoculant
    Liu, Shuiqing
    Cui, Chunxiang
    Wang, Xin
    Han, Chong
    Chen, Hengli
    Shi, Jiejie
    [J]. APPLIED SURFACE SCIENCE, 2018, 431 : 202 - 206
  • [14] Phase transformation and microstructural control of the α-solidifying γ-Ti-45Al-2Nb-0.7Cr-0.3Si intermetallic alloy
    Mathabathe, M. N.
    Govender, S.
    Bolokang, A. S.
    Mostert, R. J.
    Siyasiya, C. W.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 757 : 8 - 15
  • [15] Prior particle boundaries and microstructural homogenization of a β-solidifying γ-TiAl alloy fabricated from prealloyed powder
    Niu, H. Z.
    Gao, T. X.
    Sun, Q. Q.
    Zhang, H. R.
    Zhang, D. L.
    Liu, G. L.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 737 : 151 - 157
  • [16] Production of titanium matrix composites reinforced with SiC particles
    Poletti, C.
    Balog, M.
    Schubert, T.
    Liedtke, V.
    Edtmaier, C.
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (09) : 2171 - 2177
  • [17] \ Effect of La inoculation on composition, content, granularity and mechanical properties of in-situ A1-30 wt%Mg2Si Composite
    Ren, Yuyan
    Liu, Tongyu
    Li, Yingmin
    Hu, Hao
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 704 : 119 - 127
  • [18] Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloy
    Schwaighofer, Emanuel
    Clemens, Helmut
    Mayer, Svea
    Lindemann, Janny
    Klose, Joachim
    Smarsly, Wilfried
    Guether, Volker
    [J]. INTERMETALLICS, 2014, 44 : 128 - 140
  • [19] MECHANICAL-BEHAVIOR OF DAMAGE-TOLERANT TIB WHISKER-REINFORCED IN-SITU TITANIUM MATRIX COMPOSITES
    SOBOYEJO, WO
    LEDERICH, RJ
    SASTRY, SML
    [J]. ACTA METALLURGICA ET MATERIALIA, 1994, 42 (08): : 2579 - 2591
  • [20] Microstructure evolution and mechanical properties of TiAl binary alloys added with SiC fibers
    Tan, Yingmei
    Chen, Ruirun
    Fang, Hongze
    Liu, Yangli
    Ding, Hongsheng
    Su, Yanqing
    Guo, Jingjie
    Fu, Hengzhi
    [J]. INTERMETALLICS, 2018, 98 : 69 - 78
1234