Path Planning of Serial Two Link Planar Manipulator for Avoidance of Steam Generator Plugged Tube

被引：1

作者：

Perumalsamy, G. ^{[1
]}

Kumar, Deepak ^{[1
]}

Visweswaran, P. ^{[1
]}

Winston, S. Joseph ^{[1
]}

Murugan, S. ^{[1
]}

机构：

[1] Indira Gandhi Ctr Atom Res, RDTG, Kalpakkam, Tamil Nadu, India

来源：

3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6 | 2020年 / 912卷

关键词：

JOINT TRAJECTORIES;

D O I：

10.1088/1757-899X/912/3/032054

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Prototype Fast Breeder Reactor (PFBR) has 8 Steam Generators (SGs). Inspection of SGs requires a remote tooling to reach each of the 547 tubes. In PFBR SG, Sodium flows through the shell side and water/steam through the tube side. Degradation of the SG tubes are caused by corrosion, pitting, wear due to flow induced vibration ; so it is necessary that degraded SG tube must be plugged at both ends in order to increase the availability of plant. So the plugged tubes will have some protrusion above tube sheet. As robotic device for inspection is two-axis Selective Compliant Assembly Robotic Arm (SCARA), so during movement from one tube to another tube, plugged tube has to be avoided for safe operation. In this paper path planning technique using vector algebra has been used to find out via point in the Cartesian space. The via point is selected such that robot can avoid plugged tube& ensures healthy operation of device.

引用

页数：11

共 50 条

[1] Steam Generator Maintenance Robot Design and Obstacle Avoidance Path Planning
Yuan, Fengwei
Ren, Gengzhen
Deng, Qian
Wang, Xiangjiang
SENSORS, 2025, 25 (02)
[2] A Heuristic Approach towards Path Planning and Obstacle Avoidance Control of Planar Manipulator
Chetty, R. M. Kuppan
Ponnambalam, S. G.
TRENDS IN INTELLIGENT ROBOTICS, AUTOMATION, AND MANUFACTURING, 2012, 330 : 1 - 11
[3] Motion planning of planar and redundant underwater serial link manipulator based on minimization of energy consumption
Kumar, Virendra
Sen, Soumen
Roy, Shibendu Shekhar
ARCHIVE OF MECHANICAL ENGINEERING, 2021, 68 (04) : 415 - 434
[4] A PATH PLANNING ALGORITHM FOR 3 LINK MANIPULATOR
ELDESSOUKI, A
ELSHISHTAWY, T
ELMAHDI, A
IFIP TRANSACTIONS A-COMPUTER SCIENCE AND TECHNOLOGY, 1992, 12 : 381 - 387
[5] Obstacle Avoidance Path Planning of Manipulator Based on Proximity
Li L.
Chen H.
Wang T.
Zhang Q.
Wang G.
Tian Y.
Peng Y.
Luo J.
Jiqiren/Robot, 2022, 44 (05): : 601 - 612
[6] The Research of The Serial Manipulator Autonomous Path-planning
Ming, Zhao
Yong, Dai
2015 FIFTH INTERNATIONAL CONFERENCE ON INSTRUMENTATION AND MEASUREMENT, COMPUTER, COMMUNICATION AND CONTROL (IMCCC), 2015, : 1761 - 1765
[7] Quintic Interpolation Joint Trajectory for the Path Planning of a Serial Two-Axis Robotic Arm for PFBR Steam Generator Inspection
Perumalsamy, G.
Visweswaran, P.
Jose, Joel
Winston, S. Joseph
Murugan, S.
MACHINES, MECHANISM AND ROBOTICS, 2019, : 637 - 648
[8] Collision avoidance based on pose constraint of end link for serial manipulator
Wang H.
Huang P.
Peng T.
Tongji Daxue Xuebao/Journal of Tongji University, 2016, 44 (01): : 128 - 135
[9] Kinematic singularities avoidance for the planar three-link nonholonomic manipulator
Krysiak, Bartlomiej
Kozlowski, Krzysztof
2015 10TH INTERNATIONAL WORKSHOP ON ROBOT MOTION AND CONTROL (ROMOCO), 2015, : 252 - 256
[10] Obstacle avoidance path planning of manipulator in multiple obstacles environment
Chen M.
Zhang Q.
Zhang G.
Liang J.
Hou Z.
Yang W.
Xu Z.
Wang J.
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, 2021, 27 (04): : 990 - 998

← 1 2 3 4 5 →