Dynamic mechanical properties of Al2O3/poly(ether ether ketone) composites

被引:37
|
作者
Goyal, R. K.
Tiwari, A. N.
Mulik, U. P.
Negi, Y. S.
机构
[1] Govt India, Ctr Mat Elect Technol, Dept Informat Technol, Pune 411008, Maharashtra, India
[2] Indian Inst Technol, Dept Met Engn & Mat Sci, Bombay 400076, Maharashtra, India
[3] Indian Inst Technol, Polymer Sci & Technol Lab, Dept Paper Technol, Saharanpur 247001, Uttar Pradesh, India
关键词
composites; electron microscopy; high performance polymers; reinforcement; viscoelastic properties;
D O I
10.1002/app.25607
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
The dynamic mechanical properties of high-performance polymer matrix composites based on semicrystalline poly(ether ether ketone) (PEEK) and aluminum oxide (Al2O3) were evaluated in the temperature range of 30-250 degrees C with a three-point-bending mode at a frequency of 1 Hz. The storage modulus and loss modulus changed significantly with the variation of the Al2O3 content in the PEEK matrix. The Al2O3 reinforcement was more pronounced above the glass-transition temperature (T-g). A composite containing 60 wt % (33 vol %) Al2O3 exhibited about a 78% increase in the storage modulus at 50 degrees C and about a 200% increase at 200 degrees C. However, there was no significant change in the mechanical loss factor and T-g associated with the peak of the mechanical loss factor or loss modulus with the addition of Al2O3. (c) 2007 Wiley Periodicals, Inc.
引用
收藏
页码:568 / 575
页数:8
相关论文
共 50 条
  • [1] Dynamic mechanical properties of Al2O3/poly(ether ether ketone) composites
    Goyal, R.K.
    Tiwari, A.N.
    Mulik, U.P.
    Negi, Y.S.
    Journal of Applied Polymer Science, 2007, 104 (01): : 568 - 575
  • [2] DYNAMIC-MECHANICAL RELAXATION PROPERTIES OF POLY(ETHER ETHER KETONE)
    KRISHNASWAMY, RK
    KALIKA, DS
    POLYMER, 1994, 35 (06) : 1157 - 1165
  • [3] Mechanical and thermal properties and cytotoxicity of Al2O3 nano particle-reinforced poly(ether-ether-ketone) for bone implants
    Wei, Tianyue
    Wang, Jin
    Yu, Xunzhi
    Wang, Youfa
    Wu, Qingzhi
    Chen, Chang
    RSC ADVANCES, 2019, 9 (59) : 34642 - 34651
  • [4] Novel high performance Al2O3/poly(ether ether ketone) nanocomposites for electronics applications
    Goyal, R. K.
    Tiwari, A. N.
    Mulik, U. P.
    Negi, Y. S.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2007, 67 (09) : 1802 - 1812
  • [5] Influence of Lubricant on the Properties of Poly(ether ether ketone) and Poly(ether ether ketone)/Carbon Fiber Composites
    Zhang, Shuling
    Mu, Jianxin
    Ren, Dianfu
    Zhou, Fugui
    Jiang, Zhenhua
    Wu, Zhongwen
    Wang, Guibin
    MACROMOLECULAR RESEARCH, 2010, 18 (12) : 1168 - 1173
  • [6] Influence of lubricant on the properties of poly(ether ether ketone) and poly(ether ether ketone)/carbon fiber composites
    Shuling Zhang
    Jianxin Mu
    Dianfu Ren
    Fugui Zhou
    Zhenhua Jiang
    Zhongwen Wu
    Guibin Wang
    Macromolecular Research, 2010, 18 : 1168 - 1173
  • [7] Dynamic mechanical behavior of poly(ether ether ketone)/poly(ether sulfone) block copolymers
    Cao, JK
    Su, WC
    Ma, RT
    Wu, ZW
    Shibata, M
    Takeishi, H
    Yosomiya, R
    MACROMOLECULAR CHEMISTRY AND PHYSICS, 1996, 197 (04) : 1495 - 1502
  • [8] The mechanical and frictional properties of poly(ether ether ketone) composites with modified aluminum borate whiskers
    Liu, Mengzhu
    Wang, Yongpeng
    Zhang, Haibo
    Jiang, Zhenhua
    HIGH PERFORMANCE POLYMERS, 2018, 30 (09) : 1048 - 1055
  • [9] Poly(ether ether ketone)/wrapped graphite nanosheets with poly(ether sulfone) composites: Preparation, mechanical properties, and tribological behavior
    Jiang, Wenlong
    Jin, Xu
    Zhang, Haibo
    Jiang, Bo
    Jiang, Zhenhua
    Zhang, Yunhe
    JOURNAL OF APPLIED POLYMER SCIENCE, 2015, 132 (14)
  • [10] Preparation and properties of poly(ether ether ketone) composites reinforced by modified wollastonite grafting with silaneterminated poly(ether ether ketone) oligomers
    Ma, Gang
    Yue, Xigui
    Zhang, Shuling
    Rong, Changru
    Wang, Guibin
    JOURNAL OF POLYMER RESEARCH, 2011, 18 (06) : 2045 - 2053