From zirconia to yttria: Sampling the YSZ phase diagram using sputter-deposited thin films

Yttria-stabilized zirconia (YSZ) thin films with varying composition between 3 mol% and 40 mol% have been prepared by direct-current ion beam sputtering at a substrate temperature of 300 degrees C, with ideal transfer of the stoichiometry from the target to the thin film and a high degree of homogeneity, as determined by X-ray photoelectron and energy-dispersive X-ray spectroscopy. The films were analyzed using transmission electron microscopy, revealing that, while the films with 8 mol% and 20 mol% yttria retain their crystal structure from the bulk compound (tetragonal and cubic, respectively), those with 3 mol% and 40 mol% Y2O3 undergo a phase transition upon sputtering (from a tetragonal/monoclinic mixture to purely tetragonal YSZ, and from a rhombohedral structure to a cubic one, respectively). Selected area electron diffraction shows a strong texturing for the three samples with lower yttria-content, while the one with 40 mol% Y2O3 is fully disordered, owing to the phase transition. Additionally, AFM topology images show somewhat similar structures up to 20 mol% yttria, while the specimen with the highest amount of dopant features a lower roughness. In order to facilitate the discussion of the phases present for each sample, a thorough review of previously published phase diagrams is presented. (C) 2016 Author(s).