Multiwavelength Digital Holography for Polishing Tool Shape Measurement

被引:0
作者
Vit, Ledl
Pavel, Psota
Jan, Vaclavik
Roman, Dolecek
Petr, Vojtisek
机构
来源
OPTIFAB 2013 | 2013年 / 8884卷
关键词
polishing; holographic interferometry; multiwavelength; contouring;
D O I
10.1117/12.2030004
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
Classical mechano-chemical polishing is still a valuable technique, which gives unbeatable results for some types of optical surfaces. For example, optics for high power lasers requires minimized subsurface damage, very high cosmetic quality, and low mid spatial frequency error. One can hardly achieve this with use of subaperture polishing. The shape of the polishing tool plays a crucial role in achieving the required form of the optical surface. Often the shape of the polishing tool or pad is not known precisely enough during the manufacturing process. The tool shape is usually premachined and later is changed during the polishing procedure. An experienced worker could estimate the shape of the tool indirectly from the shape of the polished element, and that is why he can achieve the required shape in few reasonably long iterative steps. Therefore the lack of the exact tool shape knowledge is tolerated. Sometimes, this indirect method is not feasible even if small parts are considered. Moreover, if processes on machines like planetary (continuous) polishers are considered, the incorrect shape of the polishing pad could extend the polishing times extremely. Every iteration step takes hours. Even worse, polished piece could be wasted if the pad has a poor shape. The ability of the tool shape determination would be very valuable in those types of lengthy processes. It was our primary motivation to develop a contactless measurement method for large diffusive surfaces and demonstrate its usability. The proposed method is based on application of multiwavelength digital holographic interferometry with phase shift.
引用
收藏
页数:6
相关论文
共 50 条
[1]   Direct shape measurement by digital wavefront reconstruction and multiwavelength contouring [J].
Wagner, C ;
Osten, W ;
Seebacher, S .
OPTICAL ENGINEERING, 2000, 39 (01) :79-85
[2]   Digital Holography on Moving Objects: Multiwavelength Height Measurements on Inclined Surfaces [J].
Schiller, Annelie ;
Beckmann, Tobias ;
Fratz, Markus ;
Belzer, Dominik ;
Bertz, Alexander ;
Carl, Daniel ;
Buse, Karsten .
OPTICAL MEASUREMENT SYSTEMS FOR INDUSTRIAL INSPECTION X, 2017, 10329
[3]   Multiwavelength digital holography: Height measurements on linearly moving and rotating objects [J].
Schiller, Annelie ;
Beckmann, Tobias ;
Fratz, Markus ;
Bertz, Alexander ;
Carl, Daniel ;
Buse, Karsten .
SPECKLE 2018: VII INTERNATIONAL CONFERENCE ON SPECKLE METROLOGY, 2018, 10834
[4]   APPLICATION OF DIGITAL HOLOGRAPHY IN DISPLACEMENT MEASUREMENT [J].
Sun, Ye .
PROCEEDINGS OF THE 2009 2ND INTERNATIONAL CONGRESS ON IMAGE AND SIGNAL PROCESSING, VOLS 1-9, 2009, :2742-2746
[5]   Three-dimensional shape measurement based on dual-refractive-index digital holography [J].
Cai, Xiao-ou ;
Hu, Feng-jun ;
Wang, Hui .
OPTICS COMMUNICATIONS, 2015, 350 :252-256
[6]   Investigation of tympanic membrane shape using digital holography [J].
Psota, Pavel ;
Tang, Haimi ;
Pooladvand, Koohyar ;
Ledl, Vit ;
Furlong, Cosme ;
Rosowski, John J. ;
Cheng, Jeffrey T. .
OPTICS AND MEASUREMENT INTERNATIONAL CONFERENCE 2019, 2019, 11385
[7]   Deformation measurement by phase-shifting digital holography [J].
Morimoto, Y ;
Nomura, T ;
Fujigaki, M ;
Yoneyama, S ;
Takahashi, I .
EXPERIMENTAL MECHANICS, 2005, 45 (01) :65-70
[8]   Deformation measurement by phase-shifting digital holography [J].
Y. Morimoto ;
T. Nomura ;
M. Fujigaki ;
S. Yoneyama ;
I. Takahashi .
Experimental Mechanics, 2005, 45 (1) :65-70
[9]   Machine tool for laser polishing - Automated polishing in tool making [J].
Werkzeugmaschine für das Laserpolieren: Automatisierte Politur im Werkzeugbau .
1600, VDI Fachmedien GmBH & Co. KG (103)
[10]   Digital holography as a tool for testing high-aperture micro-optics [J].
Müller, J ;
Kebbel, V ;
Jüptner, W .
OPTICS AND LASERS IN ENGINEERING, 2005, 43 (07) :739-751