Effect of Al and Ce oxide layers electrodeposited on OC4004 stainless steel on its corrosion characteristics in acid media

被引：29

作者：

Stoyanova, E.

Nikolova, D.

Stoychev, D.

Stefanov, P.

Marinova, T.

机构：

[1] Bulgarian Acad Sci, Inst Phys Chem, BU-1113 Sofia, Bulgaria

[2] Bulgarian Acad Sci, Inst Gen & Inorgan Chem, BU-1113 Sofia, Bulgaria

来源：

CORROSION SCIENCE | 2006年 / 48卷 / 12期

关键词：

stainless steel; acid corrosion; electrodeposited Al2O3; Ce2O3-CeO2; films; passivity;

D O I：

10.1016/j.corsci.2006.04.008

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The changes in the corrosion characteristics of stainless steel OC4004 in 0.1 M HNO3 after electrodeposition of thin Al and Ce oxide films on it has been investigated. The Ce(2)o(3)-CeO2 layers have been found to possess a pronounced stabilizing effect on the steel passive state and on its corrosion resistance, respectively, whereas the Al2O3 layers do not improve considerably the corrosion behaviour of the SS/Al2O3 system. A twice-lower corrosion current was observed with a ternary SS/Al2O3/Ce(2)o(3)-CeO2 system in the passive region, while the zones of potentials, where the steel is in a stable passive state, are not changed. The obtained results permit the assumption that the cerium oxides layer acts as an effective cathode playing a determining role with respect to the improvement of the corrosion behavior of the steel. It has been concluded that when the SS/Al2O3/Ce2O3-CeO2 System is used in media containing nitric acid, the corrosion will proceed at potentials where the passive state of steel would not be disturbed. (c) 2006 Elsevier Ltd. All rights reserved.

引用

页码：4037 / 4052

页数：16

共 32 条

[1]

ACHMETOV NS, 1988, GEN INORGANIC CHEM, P69

[2] The electrochemical behaviour of stainless steels following surface modification in cerium-containing solutions [J].