Transient simulation of conjugate heat transfer in the roof cooling panel of an electric arc furnace

被引：25

作者：

Mombeni, Afshin Gharib ^{[1
]}

Hajidavalloo, Ebrahim ^{[1
]}

Behbahani-Nejad, Morteza ^{[1
]}

机构：

[1] Shahid Chamran Univ Ahvaz, Dept Mech Engn, Ahvaz 61357, Iran

来源：

APPLIED THERMAL ENGINEERING | 2016年 / 98卷

关键词：

Electric arc furnace; Conjugate heat transfer; Temperature gradient; Roof cooling panel;

D O I：

10.1016/j.applthermaleng.2015.12.004

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Temperature variation of an electric arc furnace roof cooling panel during the charging stage is a major source of thermal fatigue and cracks in cooling pipes and consequently frequent stops in the furnace operation. In this research, transient heat transfer analyses of the cooling panel pipe have been used in order to understand the grounds for crack generation. Conjugate heat transfer has been considered in the analysis of roof cooling panel including water and tube thickness. The temperature variations of the pipe wall and water were simulated and the results were validated with the experimental data obtained from a real site. The simulation results revealed that there are severe temperature gradients versus time in the bends and also in the peripheral direction of the pipe initiating thermal stress and cracks. Using cooper instead of steel for roof cooling panel material showed that panel temperature decreased by around 6%. Also, changing the roof cooling panel geometry to a circular shape reduced the temperature gradient in the panel and created more uniform temperature distribution. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：80 / 87

页数：8

共 50 条

[21] Simulation of a DC electric arc furnace for steelmaking:: study in the arc and bath regions [J].

Argáez, MAR ;

Martínez, LGT .

REVISTA DE METALURGIA, 2001, 37 (03) :445-458

[22] Conjugate Heat Transfer Analysis of Film Cooling Flows [J].

Hideaki SUGISHITA ;

Hideyuki UECHI ;

Kiyoshi SUENAGA .

JournalofThermalScience, 2006, (01) :85-91

[23] Conjugate heat transfer analysis of film cooling flows [J].

Xiaochen Lu ;

Peixue Jiang ;

Hideaki Sugishita ;

Hideyuki Uechi ;

Kiyoshi Suenaga .

Journal of Thermal Science, 2006, 15 :85-91

[24] Conjugate Heat Transfer Analysis of Film Cooling Flows [J].

Lu, Xiaochen ;

Jiang, Peixue ;

Sugishita, Hideaki ;

Uechi, Hideyuki ;

Suenaga, Kiyoshi .

JOURNAL OF THERMAL SCIENCE, 2006, 15 (01) :85-91

[25] Changes in the Electrical Parameters during the Heat in an Electric Arc Furnace [J].

Yu. M. Mironov .

Russian Metallurgy (Metally), 2022, 2022 :619-624

[26] Changes in the Electrical Parameters during the Heat in an Electric Arc Furnace [J].

Mironov, Yu. M. .

RUSSIAN METALLURGY, 2022, 2022 (06) :619-624

[27] Numerical simulation of conjugate heat transfer in electronic cooling and analysis based on field synergy principle [J].

Cheng, Y. P. ;

Lee, T. S. ;

Low, H. T. .

APPLIED THERMAL ENGINEERING, 2008, 28 (14-15) :1826-1833

[28] Conjugate heat transfer simulation of the linear range extender: Thermal design considerations for cooling strategy [J].

Qin, Shuo ;

Xu, Lei ;

Jia, Boru ;

Ren, Peirong ;

Zhang, Zhiyuan ;

Liu, Chang ;

Feng, Huihua .

ENERGY, 2025, 318

[29] Methodology of numerical coupling for transient conjugate heat transfer [J].

Radenac, E. ;

Gressier, J. ;

Millan, P. .

COMPUTERS & FLUIDS, 2014, 100 :95-107

[30] Bi-Fo time scaling method in the numerical simulation of transient conjugate heat transfer [J].

Shi, Yu ;

Ding, Shuiting ;

Qiu, Tian ;

Liu, Chuankai ;

Zhang, Shenghui .

PROPULSION AND POWER RESEARCH, 2021, 10 (03) :209-223

← 1 2 3 4 5 →