Correlation between Luder strain and retained austenite in TRIP-assisted cold rolled steel sheets

被引：39

作者：

Emadoddin, E. ^{[1
]}

Akbarzadeh, A. ^{[1
]}

Daneshi, G. H. ^{[1
]}

机构：

[1] Sharif Univ Technol, Fac Mat Sci & Engn, Tehran, Iran

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2007年 / 447卷 / 1-2期

关键词：

TRIP steel; retained austenite; Luders strain; intercritical annealing; cold rolled sheet;

D O I：

10.1016/j.msea.2006.10.046

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In developed multiphase high strength, high formability TRIP-aided steel, Luders bands are observed similar to conventional low carbon steels. Retained austenite as the most effective constituent in TRIP steels, is responsible for Luders band formation as well as other properties such as formability, physical and mechanical properties. In the present study, a correlation between the Luders strain and the retained austenite characterization is proposed and verified by experimental evidences of the work carried out on two types of TRIP steel sheets. Intercritical annealing of cold rolled TRIP steels at different temperatures change the volume fraction of the retained austenite as well as the carbon concentration of samples which in turn leads to different Luders strain values. The experimental results show that the Luders strain is limited when the volume fraction and carbon concentration of the retained austenite increase in the TRIP steels. (c) 2006 Elsevier B.V. All rights reserved.

引用

页码：174 / 179

页数：6

共 18 条

[1]

Baird J.D., 1971, METALL REV, V16, P1, DOI DOI 10.1179/MTLR.1971.16.1.1

[2] Structure-properties relationship in TRIP steels containing carbide-free bainite [J].

De Cooman, BC .

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2004, 8 (3-4) :285-303

[3]

DYSON DJ, 1970, J IRON STEEL I, V208, P469

[4] Effect of intercritical annealing on retained austenite characterization in textured TRIP-assisted steel sheet [J].

Emadoddin, E. ;

Akbarzadeh, A. ;

Daneshi, Gh. .

MATERIALS CHARACTERIZATION, 2006, 57 (4-5) :408-413

[5]

GODET S, 2003, THESIS U CATHOLIQUE, P9

[6]

Hall E.O., 1970, YEILD POINT PHENOMEN, P171, DOI [10.1007/978-1-4684-1860-6, DOI 10.1007/978-1-4684-1860-6]

[7]

JATCZEK CF, 1980, SOC AUTOMOTIVE ENG

[8] Effect of Cu, Cr and Ni on mechanical properties of 0.15 wt.% C TRIP-aided cold rolled steels [J].

Kim, SJ ;

Lee, CG ;

Lee, TH ;

Oh, CS .

SCRIPTA MATERIALIA, 2003, 48 (05) :539-544

[9] Effects of tramp elements on formability of low-carbon TRIP-aided multiphase cold-rolled steel sheets [J].

Lee, CG ;

Kim, SJ ;

Lee, TH ;

Oh, CS .

ISIJ INTERNATIONAL, 2004, 44 (04) :737-743

[10] Effect of heat treatment on formability in 0.15C-1.5Si-1.5Mn multiphase cold-rolled steel sheet [J].

Lee, CG ;

Kim, SJ ;

Song, BH ;

Lee, S .

METALS AND MATERIALS INTERNATIONAL, 2002, 8 (05) :435-441

← 1 2 →