The influence of TiB2 coating on the friction parameters in sliding pairs under lubricated friction conditions

被引：2

作者：

Szczypinski-Sala, W. ^{[1
]}

Lubas, J. ^{[2
]}

机构：

[1] Cracow Univ Technol, Inst Motor Vehicles & Internal Combust Engines, Krakow, Poland

[2] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Rzeszow, Poland

来源：

INTERNATIONAL AUTOMOTIVE CONFERENCE (KONMOT2018) | 2018年 / 421卷

关键词：

TRIBOLOGICAL PROPERTIES; MECHANICAL-PROPERTIES; TEMPERATURE; CONTACT; MICROSTRUCTURE;

D O I：

10.1088/1757-899X/421/3/032026

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The aim of the present work is to determine the influence of TiB2 coating on the friction parameters in sliding pairs under lubricated friction conditions. The TiB2 coating deposited on modified surface layers of ring specimens made of 46Cr2 steel were matched under test conditions with counterparts made of CuPb30 bearing alloys. The tested sliding pairs were lubricated with 15W/40 mineral oil and 5W/40 synthetic engine oil. The lubrication of friction area with mineral oil causes the reduction of friction force and temperature in the friction area, whereas the lubrication with synthetic oil reduces the wear of the bearing and the changes in the geometrical structure of the cooperating friction pair elements. Lubrication of the friction area in the start-up phase of the friction pair by mineral oil causes faster stabilization of the friction conditions in the contact area than in case of lubrication of the friction pair by the synthetic oil.

引用

页数：9

共 15 条

[11] Microstructural aspects of wear in soft tribological alloys [J].

Schouwenaars, R. ;

Jacobo, V. H. ;

Ortiz, A. .

WEAR, 2007, 263 :727-735

[12]

Szczypinski-Sala W, 2016, IOP C SER MAT SCI EN, V148, P1

[13] Tribological performance of SiC and TiB2 against SiC and Al2O3 at low sliding speeds [J].

Wäsche, R ;

Klaffke, D ;

Troczynski, T .

WEAR, 2004, 256 (7-8) :695-704

[14] TiB2 reinforced hybrid-fabric composites with enhanced thermal and mechanical properties for high-temperature tribological applications [J].

Yuan, Junya ;

Zhang, Zhaozhu ;

Yang, Mingming ;

Guo, Fang ;

Men, Xuehu ;

Liu, Weimin .

TRIBOLOGY INTERNATIONAL, 2017, 115 :8-17

[15] Influence of negative bias voltage and deposition temperature on microstructure and properties of superhard TiB2 coatings deposited by high power impulse magnetron sputtering [J].

Zhang, Teng Fei ;

Gan, Bin ;

Park, Seong-mo ;

Wang, Qi Min ;

Kim, Kwang Ho .

SURFACE & COATINGS TECHNOLOGY, 2014, 253 :115-122

← 1 2 →