IMPACT AND FATIGUE CHARACTERISTICS OF ADDITIVELY MANUFACTURED STEEL MATERIALS: A REVIEW

被引：4

作者：

Wang, Jing Jing ^{[1
]}

Zhang, Meng ^{[1
,2
]}

Tan, Xipeng ^{[1
,2
]}

Jing, Wei ^{[1
,2
]}

Liu, Er Jia ^{[2
]}

Tor, Shu Beng ^{[2
]}

Li, Hua ^{[2
]}

机构：

[1] Nanyang Technol Univ, Singapore Ctr Printing 3D, 50 Nanyang Ave, Singapore, Singapore

[2] Nanyang Technol Univ, Sch Mech & Aerosp Engn, 50 Nanyang Ave, Singapore, Singapore

来源：

PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING | 2018年

基金：

新加坡国家研究基金会;

关键词：

Steel; Additive manufacturing; Impact; Fatigue; MECHANICAL-PROPERTIES; MARAGING-STEEL; LASER; BEHAVIOR; FRACTURE;

D O I：

10.25341/D4T881

中图分类号：

R318 [生物医学工程];

学科分类号：

0831 ;

摘要：

Good mechanical properties are essential for steel parts additively manufactured (AM), especially, for load bearing components. For example, a proper impact toughness is necessary for structural steels used in marine and offshore (M & O) industry to prevent low temperature brittleness of the steels while a high fatigue strength warrant a long service span of the steels. Although the works on charpy and fatigue characteristics of AM parts are lacking, some related studies on their fracture behavior have been reported, which cover a range of steels including 316L stainless steel, maraging steel, 17-4 PH stainless steel, H13 tool steel, etc. This paper critically summaries the reported works and discusses a future direction for the study of the impact and fatigue characteristics of AM steels.

引用

页码：487 / 492

页数：6

共 26 条

[1] Defect-dominated fatigue behavior in type 630 stainless steel fabricated by selective laser melting [J].

Akita, Masayuki ;

Uematsu, Yoshihiko ;

Kakiuchi, Toshifumi ;

Nakajima, Masaki ;

Kawaguchi, Ryosei .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 666 :19-26

[2] Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting [J].

Bai, Yuchao ;

Yang, Yongqiang ;

Wang, Di ;

Zhang, Mingkang .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 703 :116-123

[3] The achievable mechanical properties of SLM produced Maraging Steel 300 components [J].

Becker, Thorsten Hermann ;

Dimitrov, Dimitri .

RAPID PROTOTYPING JOURNAL, 2016, 22 (03) :487-494

[4] A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes [J].

Beretta, S. ;

Romano, S. .

INTERNATIONAL JOURNAL OF FATIGUE, 2017, 94 :178-191

[5]

Brytan Z., 2017, ARCH METALLURGY MAT, V62

[6]

Hanns A., FATIGUE ANAL SELECTI

[7] Additive manufacturing of metals [J].

Herzog, Dirk ;

Seyda, Vanessa ;

Wycisk, Eric ;

Emmelmann, Claus .

ACTA MATERIALIA, 2016, 117 :371-392

[8] Direct metal deposition (DMD) of H13 tool steel on copper alloy substrate: Evaluation of mechanical properties [J].

Imran, M. Khalid ;

Masood, S. H. ;

Brandt, Milan ;

Bhattacharya, Sudip ;

Mazumder, Jyotirmoy .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (09) :3342-3349

[9] Mechanical properties of AlSi10Mg produced by Selective Laser Melting [J].

Kempen, K. ;

Thijs, L. ;

Van Humbeeck, J. ;

Kruth, J. -P. .

LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012), 2012, 39 :439-446

[10] Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel [J].

Kempen, K. ;

Yasa, E. ;

Thijs, L. ;

Kruth, J. -P. ;

Van Humbeeck, J. .

LASERS IN MANUFACTURING 2011: PROCEEDINGS OF THE SIXTH INTERNATIONAL WLT CONFERENCE ON LASERS IN MANUFACTURING, VOL 12, PT A, 2011, 12 :255-263

← 1 2 3 →