On the comparison of the abrasive wear behavior of aluminum alloyed and standard Hadfield steels

被引：57

作者：

Abbasi, Majid ^{[1
,2
]}

Kheirandish, Shahram ^{[2
]}

Kharrazi, Yousef ^{[2
]}

Hejazi, Jalal ^{[2
]}

机构：

[1] Babol Noshirvani Univ Technol, Fac Mech Engn, Babol Sar, Iran

[2] Iran Univ Sci & Technol, Sch Met & Mat Engn, Tehran, Iran

来源：

WEAR | 2010年 / 268卷 / 1-2期

关键词：

Pin on disk; Abrasive wear; Grinding wheel; Aluminum alloyed Hadfield steel; DEFORMATION; RESISTANCE; SINGLE;

D O I：

10.1016/j.wear.2009.07.010

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The abrasive wear behaviors of aluminum alloyed Hadfield steel at the high and low stress wear conditions were studied and compared with non-Al alloyed Hadfield steel. The wear tests were done with the pin on disc method using the abrasive wheel. The main parameters such as alloy compositions, normal load, sliding speed and sliding distance were evaluated. It is shown that at the low stress condition, the aluminum alloyed Hadfield steel has higher wear resistance than the non-Al alloyed Hadfield steel. But at the high stress wear conditions, the non-Al alloyed Hadfield steel is more resistant than the Al alloyed. (C) 2009 Elsevier B.V. All rights reserved.

引用

页码：202 / 207

页数：6

共 22 条

[1] ABBASI M, 2008, INT C AMPT BAHR
[2] The fracture and plastic deformation of aluminum alloyed Hadfield steels
Abbasi, Majid
Kheirandish, Shahram
Kharrazi, Yosef
Hejazi, Jalal
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 513-14 : 72 - 76
[3] Allahkaram SR, 2008, INT J ENG-IRAN, V21, P55
[4] *AM SOC MET, 2004, ASM HDB, V9
[5] ASM, 2005, ASM HDB, V1
[6] Deformation and fracture behaviour of high manganese austenitic steel
Bayraktar, E
Khalid, FA
Levaillant, C
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 147 (02) : 145 - 154
[7] Strain hardening behavior of aluminum alloyed Hadfield steel single crystals
Canadinc, D
Sehitoglu, H
Maier, HJ
Chumlyakov, YI
[J]. ACTA MATERIALIA, 2005, 53 (06) : 1831 - 1842
[8] The role of dense dislocation walls on the deformation response of aluminum alloyed hadfield steel polycrystals
Canadinc, D.
Sehitoglu, H.
Maier, H. J.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 454 : 662 - 666
[9] MECHANISM OF WORK-HARDENING IN HADFIELD MANGANESE STEEL
DASTUR, YN
LESLIE, WC
[J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (05): : 749 - 759
[10] Dieter George Ellwood, 1976, Mechanical metallurgy, V3

← 1 2 3 →