Atom probe tomography of carbides occurring in "carbide-free" bainitic steels

被引：6
|
作者：
Hofer, C. [1 ]
Winkelhofer, F. [2 ]
Krammerbauer, J. [2 ]
Clemens, H. [1 ]
Primig, S. [1 ]
机构：
[1] Univ Leoben, Dept Phys Met & Mat Testing, Franz Josef Str 18, A-8700 Leoben, Austria
[2] Voestalpine Stahl Linz GmbH, A-4020 Linz, Austria
来源：
MATERIALS TODAY-PROCEEDINGS | 2015年 / 2卷
关键词：
Carbide-free bainite; carbides; atom probe tomography (APT); SILICON STEEL; TRANSFORMATION;
D O I：
10.1016/j.matpr.2015.07.433
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
One conventional and two "carbide-free" bainitic steels, consisting of needle or plate shaped bainitic ferrite, retained austenite and possible carbides have been studied by atom probe tomography. These low C containing steels differed in the amounts of Si, Mn and Cr. In all steels carbides with a chemical composition corresponding to cementite were found, although e-carbide would be expected in high Si containing steels. Additionally, Ti-carbides were observed in the conventional bainitic steel. Si and Cr reduced the amount of carbides, but were ineffective in fully suppressing cementite formation. (C) 2015 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：925 / 928
页数：4
相关论文
共 50 条
  • [21] Thermomechanical Treatment of Carbide-Free Bainitic Steel
    Sk. Md. Hasan
    Debalay Chakrabarti
    Shiv Brat Singh
    Metal Science and Heat Treatment, 2021, 63 : 354 - 362
  • [22] Combinatorial optimization of carbide-free bainitic nanostructures
    Huang, H.
    Sherif, M. Y.
    Rivera-Diaz-del-Castillo, P. E. J.
    ACTA MATERIALIA, 2013, 61 (05) : 1639 - 1647
  • [23] Correlative microscopy of a carbide-free bainitic steel
    Hofer, Christina
    Bliznuk, Vitaliy
    Verdiere, An
    Petrov, Roumen
    Winkelhofer, Florian
    Clemens, Helmut
    Primig, Sophie
    MICRON, 2016, 81 : 1 - 7
  • [24] Design of carbide-free low-temperature ultra high strength bainitic steels
    Garcia-Mateo, Carlos
    Caballero, Francisca Garcia
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2007, 98 (02) : 137 - 143
  • [25] Design of cold rolled and continuous annealed carbide-free bainitic steels for automotive application
    Caballero, F. G.
    Allain, S.
    Cornide, J.
    Puerta Velasquez, J. D.
    Garcia-Mateo, C.
    Miller, M. K.
    MATERIALS & DESIGN, 2013, 49 : 667 - 680
  • [26] Design of cooling route for carbide-free bainitic rail steels and resultant microstructures and properties
    Xiao, Naiyou
    Fei, Junjie
    Li, Meiying
    Zhou, Jianhua
    Jia, Tao
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 891
  • [27] Effect of Processing Techniques on Microstructure and Mechanical Properties of Carbide-free Bainitic Rail Steels
    Liu, J. P.
    Li, Y. Q.
    Jin, J. Y.
    Zhang, Y. H.
    Liu, F. S.
    Su, R.
    Narayanaswamy, Balaji
    Zhou, Q. Y.
    MATERIALS TODAY COMMUNICATIONS, 2020, 25
  • [28] DEVELOPMENT OF HOT ROLLED COPPER/NICKEL ALLOYED TRIP STEELS WITH CARBIDE-FREE BAINITIC MATRIX
    Allain, S.
    Lung, T.
    Colin, C.
    Garat, X.
    NEW DEVELOPMENTS ON METALLURGY AND APPLICATIONS OF HIGH STRENGTH STEELS: BUENOS AIRES 2008, VOLS 1 AND 2, PROCEEDINGS,, 2008, : 109 - 122
  • [29] The role of retained austenite in dry rolling/sliding wear of nanostructured carbide-free bainitic steels
    Moghaddam, P. Valizadeh
    Hardell, J.
    Vuorinen, E.
    Prakash, B.
    WEAR, 2019, 428 : 193 - 204
  • [30] Development of hot rolled copper/nickel alloyed TRIP steels with carbide-free bainitic matrix
    Allain, S.
    Iung, T.
    REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 2008, 105 (10): : 520 - 530
12345