Droplet-Based Additive Manufacturing of Hard Metal Components by Thermoplastic 3D Printing (T3DP)

被引：28

作者：

Scheithauer, U. ^{[1
]}

Poetschke, J. ^{[1
]}

Weingarten, S. ^{[1
]}

Schwarzer, E. ^{[1
]}

Vornberger, A. ^{[1
]}

Moritz, T. ^{[1
]}

Michaelis, A. ^{[1
]}

机构：

[1] Fraunhofer IKTS, Inst Ceram Technol & Syst, Winterbergstrasse 28, D-01277 Dresden, Germany

来源：

JOURNAL OF CERAMIC SCIENCE AND TECHNOLOGY | 2017年 / 8卷 / 01期

关键词：

Additive Manufacturing; Thermoplastic 3D printing; hard metal; cemented carbide; WC-Co;

D O I：

10.4416/JCST2016-00104

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Thermoplastic 3D printing (T3DP) is an Additive Manufacturing (AM) technology that cannot only be used for producing ceramic, metal or multi-material components, but for the Additive Manufacturing of hard metal or cemented carbide components, too. This is possible because the technology combines the precise deposition of small droplets of molten thermoplastic hard-metal-containing suspensions and an increasing viscosity resulting from a cooling process as curing mechanism. This paper demonstrates the suitability of the T3DP-process for the AM of hard metal compounds. Using WC-Co suspensions with a solid content of 67 vol%, single droplets were deposited and first components manufactured. After de-binding and sintering, completely dense samples were achieved. Zero porosity was determined in the microstructures analyzed by means of FESEM and optical microscopy.

引用

页码：155 / 159

页数：5

共 15 条

[1]

[Anonymous], 2012, F279212A ASTM

[2]

GU D, 2000, J ALLOY COMPD, V431, P112

[3] WC-Co particulate reinforcing Cu matrix composites produced by direct laser sintering [J].

Gu, Dongdong ;

Shen, Yifu .

MATERIALS LETTERS, 2006, 60 (29-30) :3664-3668

[4]

Kelley A., 1998, THESIS MIT, P1

[5] Three-dimensional printing of tungsten carbide-10 wt% cobalt using a cobalt oxide precursor [J].

Kernan, Brian D. ;

Sachs, Emanuel M. ;

Oliveira, Mark A. ;

Cima, Michael J. .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2007, 25 (01) :82-94

[6] Consolidation phenomena in laser and powder-bed based layered manufacturing [J].

Kruth, J. -P. ;

Levy, G. ;

Klocke, F. ;

Childs, T. H. C. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2007, 56 (02) :730-759

[7] Manufacturing of WC-Co moulds using SLS machine [J].

Kumar, S. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) :3840-3848

[8]

Laoui T, 1999, POWDER METALL, V42, P203

[9]

Mezger T.G., 2016, THE RHEOLOGY MANUAL

[10] Additive Manufacturing of Metal-Ceramic-Composites by Thermoplastic 3D-Printing (3DTP) [J].

Scheithauer, U. ;

Slawik, T. ;

Schwarzer, E. ;

Richter, H. -J. ;

Moritz, T. ;

Michaelis, A. .

JOURNAL OF CERAMIC SCIENCE AND TECHNOLOGY, 2015, 6 (02) :125-131

← 1 2 →