Thermal characterization of an epoxy-based underfill material for flip chip packaging

被引：95

作者：

He, Y ^{[1
]}

Moreira, BE ^{[1
]}

Overson, A ^{[1
]}

Nakamura, SH ^{[1
]}

Bider, C ^{[1
]}

Briscoe, JF ^{[1
]}

机构：

[1] Intel Corp, Assembly Test Mat Operat, Chandler, AZ 85226 USA

来源：

THERMOCHIMICA ACTA | 2000年 / 357卷

关键词：

epoxy-based underfill; flip chip packaging;

D O I：

10.1016/S0040-6031(00)00357-9

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Epoxy-based underfill encapsulant materials are used in advanced microelectronic packaging to reduce thermal stresses on the solder joints and interconnections in integrated circuits. Therefore, their thermal properties directly affect package performance and reliability. In this study, the thermal properties of an epoxy-based underfill material developed for Intel's flip chip packaging were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermomechanical analysis (TMA), dynamic mechanical thermal analysis (DMTA) and DMA techniques. Experimental results showed that this epoxy can be cured rapidly with low core weight loss. Near room temperature, the cured epoxy has a low coefficient of thermal expansion (CTE) and a moderate storage modulus, resulting in a low stress index. The glass transition temperature and thermomechanical properties as a function of epoxy curing conditions will he discussed. (C) 2000 Elsevier Science B.V. All rights reserved.

引用

页码：1 / 8

页数：8

共 13 条

[1]

BARTON JM, 1985, ADV POLYM SCI, V72, P111

[2]

Boustedt K., 1997, Microelectronics International, V14, P31

[3]

CHARTOFF RP, 1994, ASSIGNMENT GLASS TRA

[4]

DAVIS E, 1964, IBM J RES DEV, P102

[5]

Ghoshal R., 1997, Microelectronics International, V14, P12

[6]

HALK DR, 1997, SURFACE MOUNT TECH

[7]

Harper CA, 1997, ELECT PACKAGING INTE

[8]

HE Y, 1997, UNPUB

[9]

Hohne G., 1996, DIFFERENTIAL SCANNIN

[10]

KIRTIKAR A, 1997, INTEL INTERNAL REPOR

← 1 2 →