Tribological Properties of High-Speed Uniform Femtosecond Laser Patterning on Stainless Steel

被引:23
作者
Gnilitskyi, Iaroslav [1 ,2 ,3 ]
Rota, Alberto [4 ,5 ,6 ]
Gualtieri, Enrico [4 ,5 ]
Valeri, Sergio [4 ,5 ,6 ]
Orazi, Leonardo [1 ,5 ]
机构
[1] Univ Modena & Reggio Emilia UNIMORE, Amendola 2, I-42122 Reggio Emilia, Italy
[2] NoviNano Lab, Pasternaka 5, UA-79015 Lvov, Ukraine
[3] Lviv Polytech Natl Univ, Dept Photon, Stepana Bandery 14, UA-79000 Lvov, Ukraine
[4] Univ Modena & Reggio Emilia, Dept Phys Comp Sci & Math, Giuseppe Campi 213-A, I-41125 Modena, Italy
[5] Univ Modena & Reggio Emilia, Ctr Interdipartimentale Ric Applicata & Serv Mecc, Vignolese 905-B, I-41125 Modena, Italy
[6] Ist CNR NANO S3, Giuseppe Campi 213, I-41125 Modena, Italy
关键词
LIPSS; laser surface texturing; tribological properties; wear; Stribeck curve; CARBON-FILMS; CERAMICS; FRICTION; DAMAGE;
D O I
10.3390/lubricants7100083
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this work, an analysis of the tribological performance of laser-induced periodic surface structures (LIPSS) treated X5CrNi1810 stainless steel was conducted. The approach followed by authors was to generate LIPSS-patterned circular tracks, composed of radial straight grooves with uniform angular periodicity. This permitted to measure the tribological properties in a pin-on-flat configuration, keeping fixed the orientation between the grooves and the sliding direction. A Stribeck curve was measured, as well as the consequent wear. A deep analysis of the sub-surface conditions after LIPSS generation was moreover performed using Focused Ion Beam (FIB) cross-section.
引用
收藏
页数:8
相关论文
共 25 条
[1]   SEMICONDUCTOR SURFACE DAMAGE PRODUCED BY RUBY LASERS [J].
BIRNBAUM, M .
JOURNAL OF APPLIED PHYSICS, 1965, 36 (11) :3688-&
[2]   Tribological performance of sub-100-nm femtosecond laser-induced periodic surface structures on titanium [J].
Bonse, J. ;
Hoehm, S. ;
Koter, R. ;
Hartelt, M. ;
Spaltmann, D. ;
Pentzien, S. ;
Rosenfeld, A. ;
Krueger, J. .
APPLIED SURFACE SCIENCE, 2016, 374 :190-196
[3]   Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughness bearing steel [J].
Bonse, J. ;
Koter, R. ;
Hartelt, M. ;
Spaltmann, D. ;
Pentzien, S. ;
Hoehm, S. ;
Rosenfeld, A. ;
Krueger, J. .
APPLIED SURFACE SCIENCE, 2015, 336 :21-27
[4]   Femtosecond laser-induced periodic surface structures on steel and titanium alloy for tribological applications [J].
Bonse, J. ;
Koter, R. ;
Hartelt, M. ;
Spaltmann, D. ;
Pentzien, S. ;
Hoehm, S. ;
Rosenfeld, A. ;
Krueger, J. .
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2014, 117 (01) :103-110
[5]   Tribological effects of surface texturing on nitriding steel for high-performance engine applications [J].
Borghi, A. ;
Gualtieri, E. ;
Marchetto, D. ;
Moretti, L. ;
Valeri, S. .
WEAR, 2008, 265 (7-8) :1046-1051
[6]   Controlled nanostructrures formation by ultra fast laser pulses for color marking [J].
Dusser, B. ;
Sagan, Z. ;
Soder, H. ;
Faure, N. ;
Colombier, J. P. ;
Jourlin, M. ;
Audouard, E. .
OPTICS EXPRESS, 2010, 18 (03) :2913-2924
[7]   Towards Friction Control using laser-induced periodic Surface Structures [J].
Eichstadt, J. ;
Romer, G. R. B. E. ;
in't Veld, A. J. Huis .
LASERS IN MANUFACTURING 2011: PROCEEDINGS OF THE SIXTH INTERNATIONAL WLT CONFERENCE ON LASERS IN MANUFACTURING, VOL 12, PT B, 2011, 12 :7-15
[8]   Femtosecond laser micromachining in transparent materials [J].
Gattass, Rafael R. ;
Mazur, Eric .
NATURE PHOTONICS, 2008, 2 (04) :219-225
[9]   Cell and tissue response to nanotextured Ti6Al4V and Zr implants using high-speed femtosecond laser-induced periodic surface structures [J].
Gnilitskyi, Iaroslav ;
Pogorielov, Maksym ;
Viter, Roman ;
Ferraria, Ana Maria ;
Carapeto, Ana Patricia ;
Oleshko, Oleksandr ;
Orazi, Leonardo ;
Mishchenko, Oleg .
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE, 2019, 21
[10]   High-speed manufacturing of highly regular femtosecond laser-induced periodic surface structures: physical origin of regularity [J].
Gnilitskyi, Iaroslav ;
Derrien, Thibault J. -Y. ;
Levy, Yoann ;
Bulgakova, Nadezhda M. ;
Mocek, Tomas ;
Orazi, Leonardo .
SCIENTIFIC REPORTS, 2017, 7