Development of AlN and TiB2 Composites with Nb2O5, Y2O3 and ZrO2 as Sintering Aids

被引：6

作者：

Gonzalez, Jose C. ^{[1
]}

Rodriguez, Miguel A. ^{[2
]}

Figueroa, Ignacio A. ^{[3
]}

Villafuerte-Castrejon, Maria-Elena ^{[3
]}

Diaz, Gerardo C. ^{[1
]}

机构：

[1] Univ Autonoma Baja California, Fac Ciencias Quim & Ingn, Calzada Tecnol 14418, Mesa De Otay 22390, Tijuana, Mexico

[2] CSIC, Inst Ceram & Vidrio, C Kelsen 5,Campus Cantoblanco, Madrid 28049, Spain

[3] Univ Nacl Autonoma Mexico, Inst Invest Mat, Ciudad Univ,AP 70-360, Ciudad De Mexico 04510, Mexico

来源：

MATERIALS | 2017年 / 10卷 / 03期

关键词：

park plasma sintering; composites; mechanical properties; MECHANICAL-PROPERTIES; THERMAL-CONDUCTIVITY; ALUMINUM NITRIDE; DENSIFICATION;

D O I：

10.3390/ma10030324

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The synthesis of AlN and TiB2 by spark plasma sintering (SPS) and the effect of Nb2O5, Y2O3 and ZrO2 additions on the mechanical properties and densification of the produced composites is reported and discussed. After the SPS process, dense AlN and TiB2 composites with Nb2O5, Y2O3 and ZrO2 were successfully prepared. X-ray diffraction analysis showed that in the AlN composites, the addition of Nb2O5 gives rise to Nb4N3 during sintering. The compound Y3Al5O12 (YAG) was observed as precipitate in the sample with Y2O3. X-ray diffraction analysis of the TiB2 composites showed TiB2 as a single phase in these materials. The maximum Vickers and toughness values were 14.19 +/- 1.43 GPa and 27.52 +/- 1.75 GPa for the AlN and TiB2 composites, respectively.

引用

页数：9

共 50 条

[41] A Study of the Thermal Conductivity, Electrical Resistivity, and Microwave Absorption of Pressureless Sintered AlN–Y2O3–Mo and AlN–Y2O3–TiN Composites
V. I. Chasnyk
D. V. Chasnyk
I. P. Fesenko
O. M. Kaidash
Journal of Superhard Materials, 2020, 42 : 165 - 176
[42] Precipitation of the Eutectic Al2O3-ZrO2 (Y2O3) on the Surface of SiC Particles
Nesmelov, D. D.
Kozhevnikov, O. A.
Ordan'yan, S. S.
Perevislov, S. N.
GLASS AND CERAMICS, 2017, 74 (1-2) : 43 - 47
[43] Hot isostatic pressing of TiB2-ZrO2(2mol% Y2O3) composite powders
Muraoka, Y
Yoshinaka, M
Hirota, K
Yamaguchi, O
MATERIALS RESEARCH BULLETIN, 1996, 31 (07) : 787 - 792
[44] Fabrication and characterization of highly transparent Er:Y2O3 ceramics with ZrO2 and La2O3 additives
Zhu, Lin-Lin
Park, Young-Jo
Gan, Lin
Go, Shin-Il
Kim, Ha-Neul
Kim, Jin-Myung
Ko, Jae-Woong
CERAMICS INTERNATIONAL, 2017, 43 (16) : 13127 - 13132
[45] Microwave sintering of CeO2 and Y2O3 co-stabilised ZrO2 from stabiliser-coated nanopowders
Huang, S. G.
Li, L.
Van der Biest, O.
Vleugels, J.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2007, 27 (2-3) : 689 - 693
[46] Effect of sintering temperature on properties of Al2O3 whisker reinforced 3 mol% Y2O3 stabilized tetragonal ZrO2 (TZ-3Y) nanocomposites
Abdullah, Muhammad
Ahmad, Jamil
Mehmood, Mazhar
COMPOSITES PART B-ENGINEERING, 2012, 43 (04) : 1785 - 1790
[47] Numerical simulation of ZrO2(Y2O3) ceramic plate penetration by cylindrical plunger
Bratov, V.
Kazarinov, N.
Petrov, Y.
DYMAT 2015 - 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, 2015, 94
[48] Stability of Ceramics Based on ZrO2 Doped with Y2O3 Under Hydrothermal Action
Komolikov, Yu. I.
Kashcheev, I. D.
Khrustov, V. R.
Pudov, V. I.
REFRACTORIES AND INDUSTRIAL CERAMICS, 2020, 61 (04) : 424 - 427
[49] Fabrication of Al2O3-Nb2O5-LiF-ZrO2 FGMs by SPS method: Microstructural evaluation, dynamic and sintering behaviour
Rodrigues de Jesus, Paulo Roberto
Poubel Mendonca da Silveira, Pedro Henrique
Ribeiro, Matheus Pereira
da Silva, Thuane Teixeira
Arantes, Vera Lucia
Gomes, Alaelson Vieira
PROCESSING AND APPLICATION OF CERAMICS, 2022, 16 (03) : 251 - 258
[50] Transitional eutectic microstructure of Al2O3-ZrO2 (Y2O3) ceramics prepared by spark plasma sintering
Xia, Xiaojian
Li, Xiaoqiang
Zhang, Minai
Zheng, Donghai
MATERIALS LETTERS, 2016, 175 : 212 - 214

← 1 2 3 4 5 →