Experimental and theoretical study on static recrystallization of a low-density ferritic steel containing 4 mass% aluminum

The static recrystallization behavior of a low-density delta-ferritic steel containing 4 wt% Al was investigated by means of hot compression tests. The fractional softening obtained from the interrupted hot compression tests was used as a measure of the combined effect of static recovery and recrystallization. The single-pass hot compression tests followed by holding were performed to reveal the degree of static recrystallization. The experimental results indicated that the onset of static recrystallization occurred at a fractional softening of 0.6, which was lower than that of other ferritic steels. Moreover, the nucleation of recrystallization was dominated by strain induced grain boundary migration. First-principles calculations were performed to verify the effect of Al on recovery, which was influenced by stacking fault energy. It was found that the stacking fault energy of the steel is 105 mJ/m(2) , much lower than that of pure iron, which explained the suppressed recovery and correspondingly the promoted recrystallization. Based on the experimental results, a new multi-pass hot rolling process with on-line annealing was developed. The grain size of the low-density delta-ferritic steel was refilled to 85 mu m by static recrystallization and the mechanical properties can meet the requirement for hull steels. (C) 2019 The Authors. Published by Elsevier Ltd.