Change on temperature at the surface of injection moulded parts

被引：11

作者：

Nicolazo, C. ^{[1
]}

Sarda, A. ^{[1
]}

Vachot, P. ^{[1
]}

Mousseau, P. ^{[1
]}

Deterre, R. ^{[1
]}

机构：

[1] Univ Nantes, Operp ERT1086, F-44475 Carquefou, France

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2010年 / 210卷 / 02期

关键词：

Injection; Temperature; TCR; PP; Moulding; THERMAL CONTACT RESISTANCE; POLYMER;

D O I：

10.1016/j.jmatprotec.2009.09.005

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A measuring system and a mathematical model are developed to study thermal transfer within polymers during the injection moulding phase. Temperature measurements within moulded parts reveal several "rise in the temperature" events at the surface of the part during the moulding cycle. These thermal singularities are related to the evolution of the parameters of implementation and depend on the nature of moulded polymer. The modelling of heat exchange makes it possible to integrate the evolution of the thermal contact between polymer and the mould as well as crystallization in the case of PP. The comparison between temperature experimental and theoretical results makes it possible to determine the characteristics of the process at the origin of these heating events. (C) 2009 Elsevier B.V. All rights reserved.

引用

页码：233 / 237

页数：5

共 50 条

[31] Sustainable design of injection moulded parts by material intensity reduction
Lucchetta, G.
Bariani, P. F.
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2010, 59 (01) : 33 - 36
[32] Elastic modulus and layers morphology of injection moulded LCP parts
Elastizitaetsmodul und Schichtenmorphologie von spritzgegossenen LCP-Platten
Juettner, G., 2000, Huethig GmbH, Heidelberg, Germany (53):
[33] Roughness measurement at injection moulded plastic parts with optical surfaces
Burger, W.
Bliedtner, J.
Rosenkranz, S.
Muller, W.
Annals of DAAAM for 2004 & Proceedings of the 15th International DAAAM Symposium: INTELLIGNET MANUFACTURING & AUTOMATION: GLOBALISATION - TECHNOLOGY - MEN - NATURE, 2004, : 63 - 64
[34] Processing-structure-properties relationships in injection moulded parts
Cunha, AM
Godinho, JS
Viana, JC
STRUCTURE DEVELOPMENT DURING POLYMER PROCESSING, 2000, 370 : 255 - 277
[35] Effects of processing parameters on formation sinkmarks on injection moulded parts
Liu, SJ
PLASTICS RUBBER AND COMPOSITES, 2001, 30 (04) : 170 - 174
[36] SOME ASPECTS OF DESIGN OF INJECTION MOULDED THERMOPLASTICS PARTS.
Clark, A.J.
1985, (96):
[37] Joining injection moulded sintered parts in the green compact phase
Potente, H
Wilke, L
KUNSTSTOFFE-PLAST EUROPE, 2004, 94 (11): : 58 - 61
[38] Flow analysis of injection-moulded parts with cylindrical microfeatures
Cui, Z.
Peng, Y.
Liu, C.
Shen, C.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2012, 226 (C6) : 1612 - 1619
[39] Effect of Process Parameters on the Quality of Micro Injection Moulded Parts
Mani, M. R.
Surace, R.
Segal, J.
Fassi, I.
Ratchev, S.
PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON MULTI-MATERIAL MICRO MANUFACTURE (4M 2011), 2011, : 121 - 124
[40] Improving weldline strengths of injection moulded parts by ultrasonic oscillation
Liu, S. -J.
Lin, K. -Y.
Tsai, S. -K.
PLASTICS RUBBER AND COMPOSITES, 2008, 37 (01) : 23 - 28

← 1 2 3 4 5 →