High-temperature tribological behavior of a NiCoCrAlY/ZrO2 duplex coating on γ-TiAl alloy

被引:0
作者
Ding, Zheng [1 ]
Miao, Qiang [1 ]
Liang, Wenping [1 ]
Yang, Zhengang [1 ]
An, Hao [1 ]
Yi, Jinwei [1 ]
Lin, Hao [1 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 211100, Jiangsu, Peoples R China
来源
MATERIALS RESEARCH EXPRESS | 2019年 / 6卷 / 08期
基金
中国国家自然科学基金;
关键词
NiCoCrAlY/ZrO2 duplex coating; high temperature; gamma-TiAl alloy; friction coefficient; wear mechanism; THERMAL BARRIER COATINGS; TI-6AL-4V ALLOY; TITANIUM-ALLOY; SLIDING WEAR; FRICTION; ALUMINA; BLADES;
D O I
10.1088/2053-1591/ab28f8
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A dense NiCoCrAlY/ZrO2 duplex coating was deposited onto the gamma-TiAl alloy by magnetron sputtering technology for the purpose of improving its friction and wear properties at high temperature. Some tests of the ball-on-disk type that were against Si3N4 counterpart, were performed at room temperature and 500 degrees C. The average friction coefficients as well as the wear rates of NiCoCrAlY/ZrO2 duplex coatings were greatly less than those of substrates at both temperatures. Besides, the H/E and H-3/E-2 value of the NiCoCrAlY/ZrO2 coatings were much higher than that of the substrate. The excellent wear-resisting property of NiCoCrAlY/ZrO2 duplex coating was caused by the synergistic effect of its high hardness and outstanding plastic-deformation resistance.
引用
收藏
页数:8
相关论文
共 50 条
  • [21] Effect of boriding on high temperature tribological behavior of CoCrMo alloy
    Oge, Mecit
    Kucuk, Yilmaz
    Oge, Tuba Ozdemir
    Gunen, Ali
    Kanca, Yusuf
    Gok, Mustafa Sabri
    TRIBOLOGY INTERNATIONAL, 2023, 187
  • [22] High-temperature tribological behaviors of Ti2AlNb-based alloys by plasma surface duplex treatment
    Wu Hong-yan
    Zhang Ping-ze
    Chen Wei
    Wang Ling
    Zhao Hao-feng
    Xu Zhong
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2009, 19 (05) : 1121 - 1125
  • [23] High-temperature oxidation resistance of sol–gel-derived ZrO2/(Al2O3–Y2O3) coating on titanium alloy
    Y. B. Yao
    Z. J. Yao
    Y. J. Zhou
    Journal of Sol-Gel Science and Technology, 2016, 80 : 612 - 618
  • [24] High-temperature oxidation resistance of (Al2O3-Y2O3)/(Y2O3-stabilized ZrO2) laminated coating on 8Nb-TiAl alloy prepared by a novel spray pyrolysis
    Yao, Junqi
    He, Yedong
    Wang, Deren
    Lin, Junpin
    CORROSION SCIENCE, 2014, 80 : 19 - 27
  • [25] Effect of Al2O3 nanoparticle reinforcement on the mechanical and high-temperature tribological behavior of Al-7075 alloy
    Bai, Yaping
    Guo, Yongchun
    Li, Jianping
    Yang, Zhong
    Tian, Jia
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2017, 231 (07) : 900 - 909
  • [26] V-alloyed ZrO2 coatings with temperature homogenization function for high-temperature sliding contacts
    Jantschner, O.
    Walter, C.
    Muratore, C.
    Voevodin, A. A.
    Mitterer, C.
    SURFACE & COATINGS TECHNOLOGY, 2013, 228 : 76 - 83
  • [27] Investigation of High-Temperature Normal Infrared Spectral Emissivity of ZrO2 Thermal Barrier Coating Artefacts by the Modified Integrated Blackbody Method
    Zhang, Tong
    Song, Xuyao
    Qi, Gongjin
    An, Baolin
    Dong, Wei
    Zhao, Yan
    Wang, Zhiyong
    Yi, Xiaosu
    Yuan, Zundong
    Zhao, Yunlong
    Sun, Luge
    Mao, Hongyu
    MATERIALS, 2022, 15 (01)
  • [28] MoS2/CoCrNi Self-Lubricating Composite Coating and Its High-Temperature Tribological Properties
    Liu Huiqiang
    Cui Gongjun
    Shi Ruibo
    Li Sai
    Kou Ziming
    RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (12) : 4280 - 4289
  • [29] High-Temperature Tribological Behaviors of In Situ-Formed TiAl-TiB2 Composites in Low-Pressure Oxygen
    Wang, Long
    Yang, Dongsheng
    Chen, Jiao
    Tan, Hui
    Zhu, Shengyu
    Cheng, Jun
    TRIBOLOGY TRANSACTIONS, 2021, 64 (05) : 864 - 872
  • [30] Microstructure and High Temperature Wear Resistance of Laser Cladding NiCoCrAlY/ZrB2 Coating
    Guo Chun
    Chen Jianmin
    Yao Rungang
    Zhou Jiansong
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (08) : 1547 - 1551