Analysis of Rotor Core Eddy-Current Losses in Interior Permanent-Magnet Synchronous Machines

被引：86

作者：

Han, Seok-Hee ^{[1
,2
]}

Jahns, Thomas M. ^{[1
]}

Zhu, Z. Q. ^{[3
]}

机构：

[1] Univ Wisconsin, Dept Elect & Comp Engn, Madison, WI 53706 USA

[2] Caterpillar Inc, Peoria, IL 61629 USA

[3] Univ Sheffield, Dept Elect & Elect Engn, Sheffield S1 3JS, S Yorkshire, England

来源：

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS | 2010年 / 46卷 / 01期

关键词：

Concentrated- and distributed-winding stators; interior permanent-magnet (IPM) machines; one- and two-layer rotors; rotor core eddy-current losses; MOTORS; POLE;

D O I：

10.1109/TIA.2009.2036666

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents the results of an investigation focused on the rotor core eddy-current losses of interior permanent-magnet (IPM) synchronous machines. First, analytical insight into the rotor core eddy-current losses of IPM machines is developed. Next, major design parameters that have the most significant impact on the rotor core eddy-current losses of IPM machines are identified. Finite-element analysis results are then presented to compare the predicted eddy-current losses in the machine core of IPM machines with one- and two-layer rotors coupled with concentrated- and distributed-winding stators. It is shown that the lowest total eddy-current losses in the machine core are achieved using a combination of distributed stator windings and two magnet layers per rotor pole, whereas minimizing only the rotor core eddy-current losses favors replacement of the rotor with a single-layer configuration.

引用

页码：196 / 205

页数：10

共 14 条

[1] Rotor loss in permanent-magnet brushless AC machines [J].

Atallah, K ;

Howe, D ;

Mellor, PH ;

Stone, DA .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2000, 36 (06) :1612-1618

[2]

BROCKMEYER A, 1996, P IEEE APPL POW EL C, P454

[3]

Deng F, 1997, IEEE T MAGN, V33, P4310, DOI 10.1109/20.620440

[4] Comparison between analytical and numerical methods of calculating tooth ripple losses in salient pole synchronous machines [J].

Drubel, O ;

Stoll, RL .

IEEE TRANSACTIONS ON ENERGY CONVERSION, 2001, 16 (01) :61-67

[5]

Han SH, 2007, IEEE IND APPLIC SOC, P558

[6] Eddy current loss in a moving-coil tubular permanent magnet motor [J].

Hor, PJ ;

Zhu, ZQ ;

Howe, D .

IEEE TRANSACTIONS ON MAGNETICS, 1999, 35 (05) :3601-3603

[7] Eddy-current loss in the rotor magnets of permanent-magnet brushless machines having a fractional number of slots per pole [J].

Ishak, D ;

Zhu, ZQ ;

Howe, D .

IEEE TRANSACTIONS ON MAGNETICS, 2005, 41 (09) :2462-2469

[8]

*JRI SOL LTD, 2007, JMAG

[9]

LAVERS JD, 1978, IEEE T MAGN, V14, P386, DOI 10.1109/TMAG.1978.1059858

[10] Rapid analytical optimization of eddy-current shield thickness for associated loss minimization in electrical machines [J].

Shah, Manoj R. ;

Lee, Sang Bin .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2006, 42 (03) :642-649

← 1 2 →