Evaluate the crashworthiness response of an aircraft fuselage section with luggage contained in the cargo hold

被引:13
作者
Zhu Xianfei [1 ]
Feng Yunwen [1 ]
Xue Xiaofeng [1 ]
Qin Qiang [1 ]
机构
[1] Northwestern Polytech Univ, Sch Aeronaut, Xian, Peoples R China
关键词
Crashworthiness; fuselage section; under-floor luggage; energy absorption; failure behaviour; acceleration characteristics; SURFACE; MODELS; SEAT;
D O I
10.1080/13588265.2016.1258957
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This article investigates the effect of luggage on the crashworthiness of fuselage section with under-floor cargo compartment. Detailed nonlinear finite element models of an aircraft fuselage section with and without luggage were developed for crash simulations which were subjected to the velocity of 9.14 m/s. The overall deformation of the fuselage, the acceleration time histories at selected locations on the fuselage and the energy absorption of key structural components were studied. It was determined that the under-floor luggage and the fuselage frame play the most important roles in energy absorption during impact which account for 45.62% and 19.42%, respectively, and that the luggage markedly affects the deformation of the entire structure. Without luggage, the cabin structure would be damaged heavily, while with luggage loaded, the integrity of the cabin structure can be maintained. Besides, the luggage model had lower peak acceleration values and shorter pulse durations when compared with the absence of luggage model results. Furthermore, the effects of luggage stiffness, viscosity and the worst-case scenario on crashworthiness were also examined. It was shown that the strength and stiffer luggage could evoke the inherent ability of cargo floor structure to absorb more energy during impact.
引用
收藏
页码:347 / 364
页数:18
相关论文
共 32 条
  • [11] Heimbs S., 2011, INT J VEHICLE STRUCT, V3, P87, DOI [10.4273/ijvss.3.2.03, DOI 10.4273/IJVSS.3.2.03]
  • [12] Experimental observations of an 8 m/s drop test of a metallic helicopter underfloor structure onto a hard surface: part 1
    Hughes, K.
    Vignjevic, R.
    Campbell, J.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2007, 221 (G5) : 661 - 678
  • [13] Jackson K. E., 2002, DOTFAAAR0562
  • [14] Development of a scale model composite fuselage concept for improved crashworthiness
    Jackson, KE
    Fasanella, EL
    Kellas, S
    [J]. JOURNAL OF AIRCRAFT, 2001, 38 (01): : 95 - 103
  • [15] Investigation of external airbags for rotorcraft crashworthiness
    Kim, H
    Kirby, BPD
    [J]. JOURNAL OF AIRCRAFT, 2006, 43 (03): : 809 - 816
  • [16] Laananen D H., 1996, International journal of crashworthiness, V1, P355, DOI 10.1533/cras.1996.0026
  • [17] Riveted joint modeling for numerical analysis of airframe crashworthiness
    Langrand, B
    Deletombe, E
    Markiewicz, E
    Drazétic, P
    [J]. FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2001, 38 (01) : 21 - 44
  • [18] On the failure criterion of aluminum and steel plates subjected to low-velocity impact by a spherical indenter
    Liu, B.
    Villavicencio, R.
    Soares, C. Guedes
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2014, 80 : 1 - 15
  • [19] Drop test and crash simulation of a civil airplane fuselage section
    Liu Xiaochuan
    Guo Jun
    Bai Chunyu
    Sun Xiasheng
    Mou Rangke
    [J]. CHINESE JOURNAL OF AERONAUTICS, 2015, 28 (02) : 447 - 456
  • [20] Simulation of aircraft landing gears with a nonlinear dynamic finite element code
    Lyle, KH
    Jackson, KE
    Fasanella, EL
    [J]. JOURNAL OF AIRCRAFT, 2002, 39 (01): : 142 - 147