Adhesion of thermoplastic matrices to carbon fibers: Effect of polymer molecular weight and fiber surface chemistry

被引:12
作者
Drzal, LT [1 ]
Raghavendran, VK [1 ]
机构
[1] Michigan State Univ, Dept Chem Engn, Ctr Composite Mat & Struct, E Lansing, MI 48824 USA
关键词
D O I
10.1177/0892705703016001209
中图分类号
TB33 [复合材料];
学科分类号
摘要
A structure property study between the interfacial adhesion and the polymer molecular weight, fiber chemistry and processing temperature in thermoplastic composites was undertaken. In the first phase of the study, four different molecular weight grades of pure bisphenol A polycarbonate (BPA-PC) and three different consolidation temperatures were used. Molecular weight and processing temperatures were found to have significant effect on interfacial adhesion, with a major increase in adhesion between the low molecular weight grade, which is below the critical molecular weight and the next higher molecular weight grade and a monotonous increase, but to a lesser degree above the critical limit. Further, the study shows that the interface might affect the segregation of polymer chains by their molecular weight resulting in a higher concentration of low molecular weight chains at the interface and consequent loss in mechanical properties [1]. In the second phase of the study, Hercules IM7 carbon fiber with four different levels of proprietary oxidative surface treatment and subsequent hydrogen passivation were employed to determine the effects of fiber chemistry on the interfacial adhesion. It was observed that, differing amount of surface oxygen functionalities have no effect on the level of adhesion, indicating insignificant polar or hydrogen bonding interactions between the fiber and the matrix. The level of adhesion was also found to be very weakly dependent on mechanical interlocking between the fiber and the matrix. In the third phase of the study, BPA-PC and polymethyl methacrylate (PMMA) were grafted on the surface of carbon fiber to study the effect of grafted chain length and entanglement on improvement in adhesion over ungrafted fiber composites. Grafting polymer chains to the fiber surface produced a penetrable interface, which improved adhesion levels by 25-100% over the ungrafted composites. The improvement in adhesion was independent of molecular weight of the grafted chains.
引用
收藏
页码:21 / 30
页数:10
相关论文
共 50 条
[31]   Effect of modification of the surface of carbon fibers on the reaction with epoxy matrices [J].
Shul', G.S. ;
Shkirkova, L.M. ;
Shchukina, L.A. ;
Gorbatkina, Yu.A. ;
Selishcheva, N.P. .
Mechanics of Composite Materials, 1988, 23 (04) :404-407
[32]   Mixed Surface Chemistry on Carbon Fibers to Promote Adhesion in Epoxy and PMMA Polymers [J].
Randall, James D. ;
Eyckens, Daniel J. ;
Sarlin, Essi ;
Palola, Sarianna ;
Andersson, Gunther G. ;
Yin, Yanting ;
Stojcevski, Filip ;
Henderson, Luke C. .
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2022, 61 (04) :1615-1623
[33]   The effect of fullerene soot on polymer-metal adhesion in thermoplastic fiber metal laminates [J].
Kobykhno, Ilya ;
Honcharenko, Dmytro ;
Stolyarov, Oleg ;
Vaganov, Gleb ;
Tolochko, Oleg .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2024, 132
[34]   Poly(vinylidene fluoride) reinforced by carbon fibers: Structural parameters of fibers and fiber-polymer adhesion [J].
Wang, Jianghong ;
Wu, Defeng ;
Li, Xiang ;
Zhang, Ming ;
Zhou, Weidong .
APPLIED SURFACE SCIENCE, 2012, 258 (24) :9570-9578
[35]   INTERFACIAL ADHESION AND MECHANICAL PROPERTIES OF THERMOPLASTIC ACRYLIC POLYMER MATRIX CARBON FIBER REINFORCED COMPOSITES [J].
Kishi, Hajime ;
Nakao, Nozomu ;
Kuwashiro, Shiho ;
Matsuda, Satoshi .
20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
[36]   Interfacial adhesion of recycled carbon fibers to polypropylene resin: Effect of superheated steam on the surface chemical state of carbon fiber [J].
Cai, Guangbin ;
Wada, Masashi ;
Ohsawa, Isamu ;
Kitaoka, Satoshi ;
Takahashi, Jun .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2019, 120 :33-40
[37]   Effect of surface functionalization on the surface and interfacial properties of thermoplastic-coated carbon fibers [J].
Su, Ya-nan ;
Zhang, Xing-hua ;
Jing, De-qi ;
Zhang, Shou-chun .
NEW CARBON MATERIALS, 2021, 36 (06) :1169-1178
[38]   SURFACE PRETREATMENT AND ADHESION OF THERMOPLASTIC FIBER-COMPOSITES [J].
KODOKIAN, GKA ;
KINLOCH, AJ .
JOURNAL OF MATERIALS SCIENCE LETTERS, 1988, 7 (06) :625-627
[39]   ADHESION OF GRAPHITE FIBERS TO EPOXY MATRICES: I. THE ROLE OF FIBER SURFACE TREATMENT. [J].
Drzal, Lawrence T. ;
Rich, Michael J. ;
Lloyd, Pamela F. .
1600, (16)
[40]   ADHESION OF GRAPHITE FIBERS TO EPOXY MATRICES .1. THE ROLE OF FIBER SURFACE-TREATMENT [J].
DRZAL, LT ;
RICH, MJ ;
LLOYD, PF .
JOURNAL OF ADHESION, 1983, 16 (01) :1-30