Effect of deformation mode and grain size on Bauschinger behavior of annealed copper

被引：20

作者：

Mahato, Jayanta Kumar ^{[1
,2
]}

De, Partha Sarathi ^{[1
]}

Sarkar, Abhijnan ^{[1
,2
]}

Kundu, Amrita ^{[1
,2
]}

Chakraborti, Pravash Chandra ^{[1
,2
]}

机构：

[1] Jadavpur Univ, Met & Mat Engn Dept, Kolkata 700032, W Bengal, India

[2] Jadavpur Univ, Ctr Excellence Phase Transformat & Prod Character, Kolkata 700032, India

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2016年 / 83卷

关键词：

Copper; Bauschinger effect; Monotonic; Ratcheting; Back stress; FLOW-STRESS; STRAIN-RATE; AISI; 316L; INTERNAL-STRESSES; STAINLESS-STEEL; DEPENDENCE; ALLOY;

D O I：

10.1016/j.ijfatigue.2015.04.023

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The present investigation looks into the effect of forward deformation mode, monotonic and cyclic, but asymmetric, on the Bauschinger phenomenon of annealed polycrystalline copper in terms of different Bauschinger parameters for 2.5-18% unidirectional tensile strain. Apart from the amount of deformation, the Bauschinger phenomenon has also been looked into as a function of stress rate used for forward deformation and also the grain size. It is found that Bauschinger effect is less pronounced when the forward deformation is carried out through asymmetric cyclic loading as compared to monotonic loading. This difference in the Bauschinger effect is attributed to lower back stress developed during asymmetric cyclic loading as compared to monotonic deformation. In the present investigation very negligible influence of stress rate on Bauschinger effect has been observed. On the other hand, for both monotonic and asymmetric cyclic deformation it is observed that Bauschinger effect is more in case of fine grain size. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：42 / 52

页数：11

共 39 条

[1] BAUSCHINGER EFFECT AND DISCONTINUOUS YIELDING
ABEL, A
MUIR, H
[J]. PHILOSOPHICAL MAGAZINE, 1972, 26 (02): : 489 - &
[2] Flow stress dependence on the grain size in alumina dispersion-strengthened copper with a bimodal grain size distribution
Afshar, Amir
Simchi, A.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 518 (1-2): : 41 - 46
[3] Current theoretical approaches to collective behavior of dislocations
Ananthakrishna, G.
[J]. PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS, 2007, 440 (4-6): : 113 - 259
[4] Bauschinger I., 1881, Civilingeneur, P289
[5] OROWANS EXPLANATION OF BAUSCHINGER EFFECT
BROWN, LM
[J]. SCRIPTA METALLURGICA, 1977, 11 (02): : 127 - 131
[6] SUBSTRUCTURE AND BACK STRESS CHANGES RESULTING FROM THE CYCLIC LOADING OF 21/4CR-1MO STEEL AT 755-K
CHALLENGER, KD
VINING, PG
[J]. MATERIALS SCIENCE AND ENGINEERING, 1983, 58 (02): : 257 - 267
[7] Dislocation density model for the effect of grain size on the flow stress of a Ti-15.2 at.% Mo β-alloy at 4.2-650 K
Chia, KH
Jung, K
Conrad, H
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 409 (1-2): : 32 - 38
[8] Cottrell AH., 1953, DISLOCATIONS PLASTIC, DOI DOI 10.1119/1.1933704
[9] De P. S., 2013, MATER DESIGN, P87
[10] CYCLIC SOFTENING AND THERMALLY ACTIVATED DEFORMATION OF TITANIUM AND ZIRCONIUM
DICKSON, JI
HANDFIELD, L
LESPERANCE, G
[J]. MATERIALS SCIENCE AND ENGINEERING, 1983, 60 (02): : L3 - L7

← 1 2 3 4 →