Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones

被引：82

作者：

Buyuksari, Umit ^{[1
]}

Ayrilmis, Nadir ^{[1
]}

Avci, Erkan ^{[1
]}

Koc, Enus ^{[2
]}

机构：

[1] Istanbul Univ, Dept Wood Mech & Technol, Istanbul, Turkey

[2] Kastamonu Entegrated Wood Co, Kastamonu, Turkey

来源：

BIORESOURCE TECHNOLOGY | 2010年 / 101卷 / 01期

关键词：

Particleboard; Formaldehyde emission; Waste pine cone; Strength; Water resistance; NEEDLE LITTER; WOOD; FEASIBILITY; STALKS; TANNIN;

D O I：

10.1016/j.biortech.2009.08.038

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

The objective of this Study was to investigate some physical/mechanical properties and formaldehyde emission of particleboard containing particles of waste stone pine cone at various usage ratios using Urea-formaldehyde resin. Some physical (thickness swelling, water absorption), mechanical (modulus of elasticity, modulus of rupture, internal bond strength) properties and formaldehyde emission of particleboards were evaluated. The addition of cone particle improved water resistance of the panels and greatly reduced their formaldehyde emissions. However, flexural properties and internal bond strength decreased with increasing cone particle content in the panel. The cone of the stone pine can be considered as an alternative to wood material in the manufacture of particleboard used in indoor environment due to lower thickness swelling, water absorption and formaldehyde emission. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：255 / 259

页数：5

共 34 条

[11] Pepper stalks (Capsicum annuum) as raw material for particleboard manufacturing [J].

Guntekin, Ergun ;

Uner, Birol ;

Turgut Sahin, H. ;

Karakus, Beyhan .

Journal of Applied Sciences, 2008, 8 (12) :2333-2336

[12] Feasibility of using eggplant (Solanum melongena) stalks in the production of experimental particleboard [J].

Guntekin, Ergun ;

Karakus, Beyhan .

INDUSTRIAL CROPS AND PRODUCTS, 2008, 27 (03) :354-358

[13] Environment-friendly adhesives for surface bonding of wood-based flooring using natural tannin to reduce formaldehyde and TVOC emission [J].

Kim, Sumin .

BIORESOURCE TECHNOLOGY, 2009, 100 (02) :744-748

[14]

Lee PW, 1985, WOOD SCI TECHNOL, V13, P23

[15]

Moslemi AA, 1974, PARTICLEBOARD, V1

[16]

MOUSSOURIS Y, 1999, FAD ONLINE PUBLICATI

[17] Influences of some factors on the formaldehyde content of particleboard [J].

Nemli, G ;

Öztürk, I .

BUILDING AND ENVIRONMENT, 2006, 41 (06) :770-774

[18] The choosing of suitable decorative surface coating material types for interior end use applications of particleboard [J].

Nemli, G ;

Örs, Y ;

Kalaycioglu, H .

CONSTRUCTION AND BUILDING MATERIALS, 2005, 19 (04) :307-312

[19] Influence of impregnating wood particles with mimosa bark extract on some properties of particleboard [J].

Nemli, G ;

Kirci, H ;

Temiz, A .

INDUSTRIAL CROPS AND PRODUCTS, 2004, 20 (03) :339-344

[20]

Nemli G, 2004, FOREST PROD J, V54, P36

← 1 2 3 4 →