Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones

被引：82

作者：

Buyuksari, Umit ^{[1
]}

Ayrilmis, Nadir ^{[1
]}

Avci, Erkan ^{[1
]}

Koc, Enus ^{[2
]}

机构：

[1] Istanbul Univ, Dept Wood Mech & Technol, Istanbul, Turkey

[2] Kastamonu Entegrated Wood Co, Kastamonu, Turkey

来源：

BIORESOURCE TECHNOLOGY | 2010年 / 101卷 / 01期

关键词：

Particleboard; Formaldehyde emission; Waste pine cone; Strength; Water resistance; NEEDLE LITTER; WOOD; FEASIBILITY; STALKS; TANNIN;

D O I：

10.1016/j.biortech.2009.08.038

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

The objective of this Study was to investigate some physical/mechanical properties and formaldehyde emission of particleboard containing particles of waste stone pine cone at various usage ratios using Urea-formaldehyde resin. Some physical (thickness swelling, water absorption), mechanical (modulus of elasticity, modulus of rupture, internal bond strength) properties and formaldehyde emission of particleboards were evaluated. The addition of cone particle improved water resistance of the panels and greatly reduced their formaldehyde emissions. However, flexural properties and internal bond strength decreased with increasing cone particle content in the panel. The cone of the stone pine can be considered as an alternative to wood material in the manufacture of particleboard used in indoor environment due to lower thickness swelling, water absorption and formaldehyde emission. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：255 / 259

页数：5

共 34 条

[1]

[Anonymous], 1993, 319 EN EUR COMM STAN

[2]

[Anonymous], 2005, 312 EN EUR COMM STAN

[3]

[Anonymous], 1993, 310 EN EUR COMM STAN

[4]

AYRILMIS N, REDUCTION FORM UNPUB

[5] The manufacture of particleboards using sunflower stalks (helianthus annuus l.) and poplar wood (populus alba L.) [J].

Bektas, I ;

Guler, C ;

Kalaycioglu, H ;

Mengeloglu, F ;

Nacar, M .

JOURNAL OF COMPOSITE MATERIALS, 2005, 39 (05) :467-473

[6]

CHOW P, 1986, WOOD FIBER SCI, V18, P99

[7]

EN, 1993, EN 317, P12

[8]

*EN, 1994, 1201 EN EUR COMM STA

[9] The manufacture of particleboards using mixture of peanut hull (Arachis hypoqaea L.) and European Black pine (Pinus nigra arnold) wood chips [J].

Guler, Cengiz ;

Copur, Yalcin ;

Tascioglu, Mat .

BIORESOURCE TECHNOLOGY, 2008, 99 (08) :2893-2897

[10]

Güler C, 2009, WOOD RES-SLOVAKIA, V54, P125

← 1 2 3 4 →