Statistical modeling, Sobol sensitivity analysis and optimization of single-tip tool geometrical parameters in the cortical bone machining process

被引:5
作者
Tahmasbi, Vahid [1 ]
Safari, Mehdi [1 ]
Joudaki, Jalal [1 ]
机构
[1] Arak Univ Technol, Dept Mech Engn, Daneshgah St,POB 41167-38181, Arak 381351177, Iran
关键词
Bone machining; tool geometry; sensitivity analysis; optimization; cortical bone; surface quality; SURFACE-ROUGHNESS; DRILLING PROCESS; QUALITY CHARACTERISTICS; FORCE; TEMPERATURE; PREDICTION;
D O I
10.1177/0954411919882862
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Machining and cutting of cortical bones are very common and important in the field of orthopedic surgeries. Considerable advances in bone machining are obtained by using computer numerical control machines and automatic surgery robots but still, researches are needed to investigate the effects of machining parameters in bone machining. In this article, for the first time, the effect of geometrical parameters of the single-tip tool on cortical bone machining is studied. The machining parameters included in the investigation are rake angle, back rake angle and side cutting edge angle and the response surface methodology is used to analyze the obtained surface quality according to a second-order regression model. The sensitivity of surface quality to the input parameters was measured by applying Sobol sensitivity analysis and the results are optimized by the Derringer algorithm. Finally, the optimum tool is determined as 15 degrees rake angle, -5 degrees back rake angle and 30 degrees side cutting edge angle. Furthermore, the sensitivity of the surface quality to the input parameters is determined as 52% for rake angle, 31% for side cutting edge angle and 17% for back rake angle.
引用
收藏
页码:28 / 38
页数:11
相关论文
共 41 条
  • [1] Surface roughness prediction based on cutting parameters and tool vibrations in turning operations
    Abouelatta, OB
    Mádl, J
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 118 (1-3) : 269 - 277
  • [2] Experimental investigations of forces and torque in conventional and ultrasonically-assisted drilling of cortical bone
    Alam, K.
    Mitrofanov, A. V.
    Silberschmidt, V. V.
    [J]. MEDICAL ENGINEERING & PHYSICS, 2011, 33 (02) : 234 - 239
  • [3] Alam K., 2009, THESIS
  • [4] Alam K., 2009, AM J BIOMED SCI 2009, V1, P312, DOI [10.5099/aj090400312, DOI 10.5099/AJ090400312]
  • [5] Altintas Y, 2012, MANUFACTURING AUTOMATION: METAL CUTTING MECHANICS, MACHINE TOOL VIBRATIONS, AND CNC DESIGN, 2ND EDITION, P1
  • [6] INTERMITTENT MICROMOTION INHIBITS BONE INGROWTH - TITANIUM IMPLANTS IN RABBITS
    ASPENBERG, P
    GOODMAN, S
    TOKSVIGLARSEN, S
    RYD, L
    ALBREKTSSON, T
    [J]. ACTA ORTHOPAEDICA SCANDINAVICA, 1992, 63 (02): : 141 - 145
  • [7] Thermal osteonecrosis and bone drilling parameters revisited
    Augustin, Goran
    Davila, Slavko
    Mihoci, Kristijan
    Udiljak, Toma
    Vedrina, Denis Stjepan
    Antabak, Anko
    [J]. ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY, 2008, 128 (01) : 71 - 77
  • [8] Cortical bone drilling and thermal osteonecrosis
    Augustin, Goran
    Zigman, Tomislav
    Davila, Slavko
    Udilljak, Toma
    Staroveski, Tomislav
    Brezak, Danko
    Babic, Slaven
    [J]. CLINICAL BIOMECHANICS, 2012, 27 (04) : 313 - 325
  • [9] Prediction of surface roughness with genetic programming
    Brezocnik, M
    Kovacic, M
    Ficko, M
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 157 : 28 - 36
  • [10] Dahotre N.B., 2016, Machining of Bone and Hard Tissues