leStudy of high-speed SRM with Amorphous steel sheet for EV

被引：0
作者：
Ueta, Kazuki [1 ]
Akatsu, Kan [1 ]
机构：
[1] Shibaura Inst Technol, Dept Elect Engn, Tokyo, Japan
来源：
2016 19TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2016) | 2016年
关键词：
Amorphous steel sheet; high-speed motor; Switched reluctance motor; MOTOR; DESIGN;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Traction motors require high output power, high efficiency and downsizing. In order to achieve the requirements, this paper shows the high-speed SRM using the amorphous steel sheet (proposed SRM). As the result, a volume of the SRM is reduced by 53% compared with a conventional PMSM. Also 1% higher efficiency than it of the conventional SRM using 0.35mm electromagnetic steel sheet is obtained by the proposed SRM. In addition, the experimental efficiency for the proposed SRM is higher than analysis result for the SRM using electromagnetic steel sheet.
引用
收藏
页数：6
相关论文
共 8 条
[1]   Analysis and design of a PM brushless motor for high-speed operations [J].
Bianchi, N ;
Bolognani, S ;
Luise, F .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2005, 20 (03) :629-637
[2]   Test results of an SRM made from a layered block of heat-treated amorphous alloys [J].
Chiba, Akira ;
Hayashi, Hiroaki ;
Nakamura, Kensaku ;
Ito, Shinya ;
Tungpimolrut, Kanokvate ;
Fukao, Tadashi ;
Rahman, Azizur ;
Yoshida, Mitsunobu .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2008, 44 (03) :699-706
[3]  
Fairall EW, 2015, 2015 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), P1621, DOI 10.1109/IEMDC.2015.7409280
[4]   Development of a High Power Density Motor Made of Amorphous Alloy Cores [J].
Fan, Tao ;
Li, Qi ;
Wen, Xuhui .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (09) :4510-4518
[5]   High-Speed Electrical Machines: Technologies, Trends, and Developments [J].
Gerada, David ;
Mebarki, Abdeslam ;
Brown, Neil L. ;
Gerada, Chris ;
Cavagnino, Andrea ;
Boglietti, Aldo .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (06) :2946-2959
[6]   Efficiency Improvements of Switched Reluctance Motors With High-Quality Iron Steel and Enhanced Conductor Slot Fill [J].
Hayashi, Hiroaki ;
Nakamura, Kensaku ;
Chiba, Akira ;
Fukao, Tadashi ;
Tungpimolrut, Kanokvate ;
Dorrell, David G. .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2009, 24 (04) :819-825
[7]   Design and Operation Characteristics of Four-Two Pole High-Speed SRM for Torque Ripple Reduction [J].
Lee, Dong-Hee ;
Trung Hieu Pham ;
Ahn, Jin-Woo .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2013, 60 (09) :3637-3643
[8]   Influence of Various Non-Oriented Electrical Steels on Motor Efficiency and Iron Loss in Switched Reluctance Motor [J].
Toda, Hiroaki ;
Senda, Kunihiro ;
Morimoto, Shigeo ;
Hiratani, Tatsuhiko .
IEEE TRANSACTIONS ON MAGNETICS, 2013, 49 (07) :3850-3853
1