Influence of the Casting Conditions on the Structure and Properties of a Co-Cr-Mo Dental Alloy

被引：0
|
作者：
Vitalariu, Anca [1 ]
Leata, Razvan [2 ]
Chelariu, Romeu [3 ]
Munteanu, Corneliu [3 ]
Cimpoesu, Ramona [3 ]
Ilie, Mariana [2 ]
Comaneci, Radu [3 ]
Moisei, Mihaela [2 ]
机构：
[1] Gr T Popa Univ Med & Pharm, Iasi 700115, Romania
[2] Dunarea de Jos Univ Galati, Fac Med & Pharm, Galati 800008, Romania
[3] Gheorghe Asachi Tech Univ Iasi, Iasi 700050, Romania
来源：
REVISTA DE CHIMIE | 2015年 / 66卷 / 12期
关键词：
Co-Cr-Mo dental alloy; casting; mold temperature; corrosion; artificial saliva; MECHANICAL-PROPERTIES; BEHAVIOR; BIOCOMPATIBILITY;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The paper aims to investigate the influence of the casting conditions and in particular of the mold temperature (T-mold) - as the main parameter of the solidification process - on structure, corrosion resistance and mechanical properties of a Co-Cr-Mo dental alloy. The alloy has been cast at T-mold = 500 and 900 degrees C and the solidification structure has been investigated by using optical and scanning electron microscopy (SEM). Corrosion of the as-cast alloy in two different artificial salivas having pH = 6.0 and 7.7, and mechanical testing revealed that casting Co-Cr-Mo dental alloy at lowest permissible temperature (500 degrees C) does not adversely affect the structure and properties of the alloy. Due to the highest melt solidification rate, an improvement in structure and corrosion resistance while maintaining the mechanical properties was found.
引用
收藏
页码：2147 / 2151
页数：5
相关论文
共 50 条
  • [1] Simulating porcelain firing effect on the structure, corrosion and mechanical properties of Co-Cr-Mo dental alloy fabricated by soft milling
    Lekatou, Angeliki G.
    Emmanouilidou, Sevasti
    Dimitriadis, Konstantinos
    Baikousi, Maria
    Karakassides, Michael A.
    Agathopoulos, Simeon
    ODONTOLOGY, 2024, 112 (02) : 372 - 389
  • [2] In vitro biocompatibility assessment of Co-Cr-Mo dental cast alloy
    Dimic, Ivana
    Cvijovic-Alagic, Ivana
    Obradovic, Natasa
    Petrovic, Jelena
    Putic, Slavisa
    Rakin, Marko
    Bugarski, Branko
    JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 2015, 80 (12) : 1541 - 1552
  • [3] Microstructure of As-cast Co-Cr-Mo Alloy Prepared by Investment Casting
    Park, Jong Bum
    Jung, Kyung-Hwan
    Kim, Kang Min
    Son, Yong
    Lee, Jung-Il
    Ryu, Jeong Ho
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2018, 72 (08) : 947 - 951
  • [4] Harmonic structure design of Co-Cr-Mo alloy with outstanding mechanical properties
    Sawangrat, Choncharoen
    Yamaguchi, Osamu
    Vajpai, Sanjay Kumar
    Ameyama, Kei
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES XVI, 2014, 939 : 60 - +
  • [5] Assessment of precipitation behavior in dental castings of a Co-Cr-Mo alloy
    Yamanaka, Kenta
    Mori, Manami
    Chiba, Akihiko
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2015, 50 : 268 - 276
  • [6] Influence of thermal treatment duration on structure and phase composition of additive Co-Cr-Mo alloy samples
    Khimich, M. A.
    Ibragimov, E. A.
    Tolmachev, A., I
    Chebodaeva, V. V.
    Uvarkin, P., V
    Saprykina, N. A.
    Saprykin, A. A.
    Sharkeev, Yu P.
    LETTERS ON MATERIALS, 2022, 12 (01): : 43 - 48
  • [7] Structure and Properties of Co-Cr-Mo Alloy Manufactured by Powder Injection Molding Method
    Matula, Grzegorz
    Szatkowska, Aleksandra
    Matus, Krzysztof
    Tomiczek, Blazej
    Pawlyta, Miroslawa
    MATERIALS, 2021, 14 (08)
  • [8] Analysis of Structure and Mechanical Properties of Co-Cr-Mo Alloy Obtained by 3D Printing
    Kazantseva, N. V.
    Ezhov, I. V.
    Davydov, D. I.
    Merkushev, A. G.
    PHYSICS OF METALS AND METALLOGRAPHY, 2019, 120 (12) : 1172 - 1179
  • [9] Influence of electrochemical corrosion tests in an artificial environment on the chemical composition of a Co-Cr-Mo dental alloy
    Baciu, E. R.
    Baciu, C.
    Bosinceanu, D. G.
    Baciu, M. A.
    Bosinceanu, D. N.
    Baciu, M.
    Bulancea, B.
    MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING VI (MODTECH 2018), 2018, 400
  • [10] Nitriding of Co-Cr-Mo alloy in nitrogen
    Tang, Ning
    Li, Yunping
    Koizumi, Yuichiro
    Chiba, Akihiko
    MATERIALS CHEMISTRY AND PHYSICS, 2014, 145 (03) : 350 - 356
12345