A Comparative Study on Temperature Resistance of High Temperature Vulcanized Silicone Rubber and Liquid Silicone Rubber

被引：0

作者：

Lai, Wenqing ^{[1
]}

Lin, Ying ^{[2
]}

Wang, Yonghong ^{[3
]}

Liu, Yuhao ^{[2
]}

Zuo, Xiujiang ^{[3
]}

Wang, Liming ^{[2
]}

Liu, Tianqi ^{[3
]}

机构：

[1] State Grid East Inner Mongolia Elect Power Co, Hohhot 010020, Peoples R China

[2] Tsinghua Univ, Grad Sch Shenzhen, Shenzhen 518055, Guangdong, Peoples R China

[3] State Grid East Inner Mongolia Elect Power Co Res, Hohhot 010020, Peoples R China

来源：

2019 2ND INTERNATIONAL CONFERENCE ON ELECTRICAL MATERIALS AND POWER EQUIPMENT (ICEMPE 2019) | 2019年

关键词：

high temperature vulcanized silicone rubber; liquid silicone rubber; crystallization temperature; isothermal crystallization process; thermal stability;

D O I：

10.1109/icempe.2019.8727250

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

High temperature vulcanized silicone rubber (HTVSR) insulators and Liquid silicone rubber (LSR) insulators have been widely used in transmission systems for more than 60 years. The temperature resistance is important for silicone rubber insulators. However, the comparative study of temperature resistance between HTVSR and LSR is rather lacking. Glass transition temperature (Tg), crystallization temperature (Tc), isothermal crystallization process, and thermal stability of HTVSR and LSR were compared by dynamic mechanical thermal analysis (DMA), differential scanning calorimeter (DSC), and thermogravimetric analysis (TGA). It was found that LSR is more suitable to use in low temperature regions due to its lower Tc compared with HTVSR. Besides, the isothermal crystallization kinetics of LSR has been described by the Avrami equation. LSR was found to be likely to produce truncated spherical crystals. For thermal stability, oxygen promotes the decomposition of LSR but influences the decomposition of HTV a little. However, the thermal stability of LSR is still more excellent than that of HTV. Finally, the conclusion can be drawn that LSR is more excellent than HTV in temperature resistance. LSR insulators can be applied in some cold regions and areas with large temperature changes.

引用

页码：197 / 200

页数：4

共 5 条

[1] Micro Characterization and Degradation Mechanism of Liquid Silicone Rubber Used for External Insulation [J].

Chen, Can ;

Jia, Zhidong ;

Wang, Xilin ;

Lu, Hai ;

Guan, Zhicheng ;

Yang, Cuiru .

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 2015, 22 (01) :313-321

[2] Effects of UVC Radiation on Thermal, Electrical and Morphological behavior of Silicone Rubber Insulators [J].

Farhadinejad, Zeinab ;

Ehsani, Morteza ;

Ahmadi-Joneidi, Iman ;

Shayegani, Amir Abass ;

Mohseni, Hosein .

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 2012, 19 (05) :1740-1749

[3] Development of composite insulators in China [J].

Liang, XD ;

Wang, SW ;

Fan, J ;

Guan, ZC .

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 1999, 6 (05) :586-594

[4] Tracking and erosion performance of liquid silicone rubber HV composite insulator housings [J].

Seifert, J. M. ;

Winter, H. -J. ;

Baersch, R. ;

Bognar, A. .

2007 ANNUAL REPORT CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA, 2007, :329-+

[5] Isothermal crystallization of Polyamide 6/Liquid natural rubber blends at high under cooling [J].

Shashidhara, G. M. ;

Pradeepa, K. G. .

THERMOCHIMICA ACTA, 2014, 578 :1-9

← 1 →