A study on three-dimensional vision system for machining setup verification

In computerized numerical control (CNC) machine tools, it is often a time-consuming and error-prone process to verify the Euclidean position accordance between the actual machining setup and its designed three-dimensional (3D) digital model. The model mainly contains the work piece and jigs. The mismatch between them will cause a failure of simulation to precisely detect the collision. The paper presents an on-machine 3D vision system to quickly verify the similarity between the actual setup and its digital model by real and virtual image processing. In this paper, the system is proposed first. Afterwards, a simple on-machine camera calibration process is presented. This calibration process determines all the camera's parameters with respect to the machine tool's coordinate frame. The accurate camera mathematical model (or virtual camera) is derived according to the actual imaging projection. Both camera-captured real images and system-generated virtual images are compensated to make them theoretically and practically identical. The mathematical equations have been derived. Using the virtual image as a reference and then superimposing the real image onto it, the operator can intuitively verify the Euclidean position in accordance to the actual setup and its 3D digital model. (C) 2009 Elsevier Ltd. All rights reserved.