High temperature tribological properties of TiAlSiN coatings produced by hybrid PVD technology

被引：94
作者：
He, Nairu [1 ,2 ]
Li, Hongxuan [1 ]
Ji, Li [1 ]
Liu, Xiaohong [1 ]
Zhou, Huidi [1 ]
Chen, Jianmin [1 ]
机构：
[1] Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China
[2] Univ Chinese Acad Sci, Beijing 100049, Peoples R China
来源：
TRIBOLOGY INTERNATIONAL | 2016年 / 98卷
基金：
中国国家自然科学基金;
关键词：
TiAlSiN coatings; Friction and wear; High temperature; AL-SI-N; XPS ANALYSIS; NANOCOMPOSITE COATINGS; MECHANICAL-PROPERTIES; OXIDATION RESISTANCE; FILMS; TI; MICROSTRUCTURE; DEPOSITION; SYSTEM;
D O I：
10.1016/j.triboint.2016.02.034
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
TiAlSiN coatings were produced with different Al and Si contents by hybrid PVD technology. The tribological properties of TiAlSiN coatings from room temperature to 800 degrees C were evaluated. The friction and wear of TiAlSiN coatings show strong dependence on stoichiometry and test temperature. The formation of SiO2 center dot nH(2)O tribo-layer contributes to the decrease of the wear rate and friction coefficient at room temperature. Al2O3 and SiO2 produced at 600 degrees C can reduce the wear rates of TiAlSiN coatings. Moreover, the rutile TiO2 phase produced at 800 degrees C plays the role of lubrication in the process of sliding. (C) 2016 Published by Elsevier Ltd.
引用
收藏
页码：133 / 143
页数：11
相关论文
共 31 条
[1]   Deposition and characterization of TiAlSiN nanocomposite coatings prepared by reactive pulsed direct current unbalanced magnetron sputtering [J].
Barshilia, Harish C. ;
Ghosh, Moumita ;
Shashidhara ;
Ramakrishna, Raja ;
Rajam, K. S. .
APPLIED SURFACE SCIENCE, 2010, 256 (21) :6420-6426
[2]  
Caliskan H, 2013, TRIBOL INT, V62, P215
[3]   Microstructure and mechanical properties of nanocomposite (Ti,Si,Al)N coatings [J].
Carvalho, S ;
Rebouta, L ;
Cavaleiro, A ;
Rocha, LA ;
Gomes, J ;
Alves, E .
THIN SOLID FILMS, 2001, 398 :391-396
[4]  
Cavaleiro A., 2006, NANOSTRUCTURED COATI
[5]   AlSiTiN nanocomposite coatings developed via Arc Cathodic PVD: Evaluation of wear resistance via tribological analysis and high speed machining operations [J].
Faga, M. G. ;
Gautier, G. ;
Calzavarini, R. ;
Perucca, M. ;
Boot, E. Aimo ;
Cartasegna, F. ;
Settineri, L. .
WEAR, 2007, 263 :1306-1314
[6]   High temperature tribological characterisation of TiAlSiN coatings produced by cathodic arc evaporation [J].
Fuentes, Gonzalo G. ;
Almandoz, Eluxka ;
Pierrugues, Ruth ;
Martinez, Rosario ;
Rodriguez, Rafael J. ;
Caro, Jaume ;
Vilaseca, Montserrat .
SURFACE & COATINGS TECHNOLOGY, 2010, 205 (05) :1368-1373
[7]   THE EFFECT OF ANION VACANCIES ON THE TRIBOLOGICAL PROPERTIES OF RUTILE (TIO2-X) [J].
GARDOS, MN .
TRIBOLOGY TRANSACTIONS, 1988, 31 (04) :427-436
[8]   AN XPS ANALYSIS OF DIFFERENT SIO2 MODIFICATIONS EMPLOYING A C 1S AS WELL AS AN AU 4F7/2 STATIC CHARGE REFERENCE [J].
GROSS, T ;
RAMM, M ;
SONNTAG, H ;
UNGER, W ;
WEIJERS, HM ;
ADEM, EH .
SURFACE AND INTERFACE ANALYSIS, 1992, 18 (01) :59-64
[9]   A study of the wear mechanisms of Ti1-xAlxN and Ti1-x-yAlxCryN coated high-speed steel twist drills under dry machining conditions [J].
Harris, SG ;
Doyle, ED ;
Vlasveld, AC ;
Audy, J ;
Quick, D .
WEAR, 2003, 254 (7-8) :723-734
[10]   SELECTIVE OXIDATION AND CHEMICAL-STATE OF AL AND TI IN (TI, AL)N COATINGS [J].
HOFMANN, S ;
JEHN, HA .
SURFACE AND INTERFACE ANALYSIS, 1988, 12 (1-12) :329-333
1234