Experimental of friction characteristic properties of TiN coating

被引：0
|
作者：
Adiyanto, Okka [1 ,2 ]
Mohammad, Effendi [1 ]
Choi, Wonsik [3 ]
Jaafar, Rosidah [1 ]
机构：
[1] Univ Tekn Malaysia Melaka, Fak Kejuruteraan Pembuatan, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Ahmad Dahlan, Dept Ind Engn, Bantul 55191, Yogyakarta, Indonesia
[3] Pusan Natl Univ, Dept Bio Ind Machinery Engn, Miryang Campus, Miryang 50463, South Korea
来源：
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2020 (MERD'20) | 2020年
关键词：
Friction; pin on disk; TiN; STEEL;
D O I：
暂无
中图分类号：
TP39 [计算机的应用];
学科分类号：
081203 ; 0835 ;
摘要：
Friction that arises in the piston ring and cylinder linear is an important part that occurs in Internal Combustion (IC). This friction will cause wear around the piston and cylinder linear. To reduce wear, coatings are needed to reduce wear that occurs. One type of coating that can be used is Titanium Nitride (TiN). This study aims to study the friction characteristics of the Titanium Nitride (TiN) coating. The friction coefficient is measured using a pin on disk tribometer. Based on the results of the study it was found that TiN has a friction coefficient range of 0.007-0.040. The lowest coefficient of friction occurs at lower loads. and increases with increased loads.
引用
收藏
页码：332 / 333
页数：2
相关论文
共 50 条
  • [1] Effects of elastic modulus mismatch between coating and substrate on the friction and wear properties of TiN and TiAlN coating systems
    Huang, Xiao
    Etsion, Izhak
    Shao, Tianmin
    WEAR, 2015, 338 : 54 - 61
  • [2] Friction and wear behaviors of TiN coating at high temperature
    College of Mechanical Engineering, Changzhou University, Changzhou, China
    不详
    Cailiao Rechuli Xuebao, 2 (191-196):
  • [3] Tin coating techniques for copper-base alloys - The effects on friction, wear and electric properties
    Hammam, T
    ELECTRICAL CONTACTS - 1997: PROCEEDINGS OF THE FORTY-THIRD IEEE HOLM CONFERENCE ON ELECTRICAL CONTACTS, 1997, : 201 - 211
  • [4] Experimental study of tribological and mechanical properties of TiN coating on AISI 52100 bearing steel
    Uddin, Ghulam Moeen
    Khan, Awais Ahmad
    Ghufran, Muhammad
    Tahir, Zia-ur-Rehman
    Asim, Muhammad
    Sagheer, Muhammad
    Jawad, Muhammad
    Ahmad, Jawad
    Irfan, Muhammad
    Waseem, Bilal
    ADVANCES IN MECHANICAL ENGINEERING, 2018, 10 (09)
  • [5] Surface Roughness and Friction Coefficient in IBAD Deposited Tin Hard Coating
    Kakas, Damir
    Skoric, Branko
    Babic, Miroslav
    Mitrovic, Slobodan
    Miletic, Aleksandar
    Vilotic, Marko
    Terek, Pal
    Kovacevic, Lazar
    FME TRANSACTIONS, 2009, 37 (02): : 83 - 86
  • [6] Ultralow friction of PVD TiN coating in the presence of glycerol as a green lubricant
    Fu, Xiaojing
    Cao, Lei
    Qi, Caixia
    Wan, Yong
    Xu, Chonghai
    CERAMICS INTERNATIONAL, 2020, 46 (15) : 24302 - 24311
  • [7] Surface Crack Analysis of TiN Coating in the Sliding Friction Contact Conditions
    Feng, Jianjun
    Yang, Xiangfan
    Xue, Lei
    CURRENT DEVELOPMENT OF MECHANICAL ENGINEERING AND ENERGY, PTS 1 AND 2, 2014, 494-495 : 659 - 662
  • [8] Colorimetric properties of TiN coating implanted by aluminum
    Zhou, QG
    Bai, XD
    Xue, XY
    Ling, YH
    Chen, XW
    Xu, J
    Wang, DR
    JOURNAL OF ALLOYS AND COMPOUNDS, 2005, 391 (1-2) : 141 - 145
  • [9] THE EXPERIMENTAL RESISTANCE PARAMETER FOR TiN COATING TO CAVITATION ACTION
    Krella, Alicja
    ADVANCES IN MATERIALS SCIENCE, 2010, 10 (01): : 4 - 18
  • [10] Characteristic evaluation of friction and wear in the C-N and TiN coated gear
    Long Lu
    Feng Xu
    Tao Jiang
    Qi Zhang
    Sungki Lyu
    International Journal of Precision Engineering and Manufacturing, 2010, 11 : 107 - 111
12345