A disposable flexible humidity sensor directly printed on paper for medical applications

被引：15

作者：

Barmpakos, D. ^{[1
,2
]}

Segkos, A. ^{[2
]}

Tsamis, C. ^{[2
]}

Kaltsas, G. ^{[1
]}

机构：

[1] Technol Educ Inst Athens, Dept Elect Engn, 28 Ag Spyridonos Str, Athens 12210, Greece

[2] Natl Ctr Sci Res Demokritos, INN, Patr Gregoriou E & 27 Neapoleos Str, Athens 15341, Greece

来源：

INTERNATIONAL CONFERENCE ON BIO-MEDICAL INSTRUMENTATION AND RELATED ENGINEERING AND PHYSICAL SCIENCES (BIOMEP 2017) | 2017年 / 931卷

关键词：

CONDUCTIVE INKS; INKJET;

D O I：

10.1088/1742-6596/931/1/012003

中图分类号：

R318 [生物医学工程];

学科分类号：

0831 ;

摘要：

The present study demonstrates an inkjet - printed interdigitated electrode array on paper substrate and its evaluation as humidity sensor. Inkjet droplet formation analysis has been performed in order to achieve repeatable results regarding generated droplets, based on the driving pulses applied on the inkjet piezoelectric element. Droplet formation has been monitored using stroboscopic effect. Three different paper substrates, namely high glossy inkjet photo paper, glossy inkjet photo and matte inkjet photo paper have been evaluated to investigate compatibility with the ink. Relative humidity measurements have been carried out in a controlled environment. Material degradation, long term response and memory effect are some of the aspects which were studied within the frame of the present work. The proposed sensor provides the opportunity for novel biomedical applications given the flexible substrate nature and the low - cost, single - step fabrication approach.

引用

页数：4

共 11 条

[1] Industrial-scale inkjet printed electronics manufacturing-production up-scaling from concept tools to a roll-to-roll pilot line [J].

Abbel, Robert ;

Teunissen, Pit ;

Rubingh, Eric ;

van Lammeren, Tim ;

Cauchois, Romain ;

Everaars, Marcel ;

Valeton, Joost ;

van de Geijn, Sjoerd ;

Groen, Pim .

TRANSLATIONAL MATERIALS RESEARCH, 2014, 1 (01)

[2] All-Inkjet Printed Strain Sensors [J].

Ando, Bruno ;

Baglio, Salvatore .

IEEE SENSORS JOURNAL, 2013, 13 (12) :4874-4879

[3]

Cui Z., 2016, Printed Electronics: Materials, Technologies and Applications

[4]

Das R., 2013, PRINTED ORGANIC FLEX

[5] Conductive Inks with a "Built-In" Mechanism That Enables Sintering at Room Temperature [J].

Grouchko, Michael ;

Kamyshny, Alexander ;

Mihailescu, Cristina Florentina ;

Anghel, Dan Florin ;

Magdassi, Shlomo .

ACS NANO, 2011, 5 (04) :3354-3359

[6]

Kawahara Y, 2013, P ACM INT C PERV UB, P201

[7] Organic Thin-Film Transistors for Chemical and Biological Sensing [J].

Lin, Peng ;

Yan, Feng .

ADVANCED MATERIALS, 2012, 24 (01) :34-51

[8]

Poon CarmenC.Y., 2014, WEARABLE SENSORS FUN, P543

[9] Disposable, Paper-Based, Inkjet-Printed Humidity and H2S Gas Sensor for Passive Sensing Applications [J].

Quddious, Abdul ;

Yang, Shuai ;

Khan, Munawar M. ;

Tahir, Farooq A. ;

Shamim, Atif ;

Salama, Khaled N. ;

Cheema, Hammad M. .

SENSORS, 2016, 16 (12)

[10] Inkjet printed single use humidity threshold monitoring sensor solution employing a mixed nanoparticle and salt region [J].

Sauer, Sebastian ;

Fischer, Wolf-Joachim .

PROCEEDINGS OF THE 30TH ANNIVERSARY EUROSENSORS CONFERENCE - EUROSENSORS 2016, 2016, 168 :489-492

← 1 2 →