Flexural failure of fabric reinforced cementitious mortar (FRCM) plates under punctual loads: Experimental test, analytical approach and numerical simulation

被引：7

作者：

Mercedes, Luis ^{[1
,2
]}

Bernat-Maso, Ernest ^{[1
,2
]}

Gil, Lluis ^{[1
,2
]}

机构：

[1] Univ Politecn Cataluna, Dept Strength Mat, Terrassa, Spain

[2] LITEM Lab Technol Innovat Struct & Mat, Terrassa, Spain

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2021年 / 272卷

关键词：

Plates; FRCM; Cementitious matrix; Carbon fibres; Basalt fibres; Flexural test; Analytical model; Numerical model; MATRIX; MODEL;

D O I：

10.1016/j.conbuildmat.2020.121651

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Fabric-reinforced cementitious matrix (FCRMs) are composites that produce lighter and more durable strengthening solutions. In this study, carbon and basalt fabrics were used to manufactured FRCM plate specimens. These plates were subjected to a centered punctual load with different punch diameters. Flexural failure mode was observed. Experimental tests showed that carbon and basalt fabrics improved notably the load capacity and the stiffness of mortar plates compared to unreinforced ones. Moreover, failure in the reinforced plates was progressive, preventing the sudden brittle failure of the unreinforced ones. Analytical and numerical models were adjusted and validated from experimental results, and both have proved to be effective calculation tools. What is more, numerical model allowed to determine a sliding tensile stress for the carbon fabric used in this study. (C) 2020 Elsevier Ltd. All rights reserved.

引用

页数：13

共 29 条

[1] New methodology for calculating damage variables evolution in Plastic Damage Model for RC structures [J].

Alfarah, B. ;

Lopez-Almansa, F. ;

Oller, S. .

ENGINEERING STRUCTURES, 2017, 132 :70-86

[2]

[Anonymous], 2019, 1015112019 EN

[3]

[Anonymous], 2008, EHE08, V1, P1689, DOI [10.1017/CBO9781107415324.004, DOI 10.1017/CBO9781107415324.004]

[4] Textile Reinforced Mortar-to-masonry bond: Experimental investigation of bond-critical parameters [J].

Askouni, Paraskevi D. ;

Papanicolaou, Catherine G. .

CONSTRUCTION AND BUILDING MATERIALS, 2019, 207 :535-547

[5] THEORY OF MULTIPLE FRACTURE OF FIBROUS COMPOSITES [J].

AVESTON, J ;

KELLY, A .

JOURNAL OF MATERIALS SCIENCE, 1973, 8 (03) :352-362

[6] Flexural Strengthening of RC Beams with an Externally Bonded Fabric-Reinforced Cementitious Matrix [J].

Babaeidarabad, Saman ;

Loreto, Giovanni ;

Nanni, Antonio .

JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2014, 18 (05)

[7]

Balsamo A., 2011, Am. Concr. Institute, V2, P769

[8] Mechanical properties of pre-stressed fabric-reinforced cementitious matrix composite (PFRCM) [J].

Bernat-Maso, Ernest ;

Gil, Lluis ;

Mercedes, Luis ;

Escrig, Christian .

CONSTRUCTION AND BUILDING MATERIALS, 2018, 191 :228-241

[9]

Bernat-Maso E, 2013, APLICACIONES AVANZADAS DE LOS MATERIALES COMPUESTOS EN LA OBRA CIVIL Y LA EDIFICACION, P137, DOI 10.3926/oms.204

[10] Simple holonomic homogenization model for the non-linear static analysis of in-plane loaded masonry walls strengthened with FRCM composites [J].

Bertolesi, Elisa ;

Milani, Gabriele ;

Poggi, Carlo .

COMPOSITE STRUCTURES, 2016, 158 :291-307

← 1 2 3 →