Low Velocity Impact Response Of Carbon Fibre Laminates Made By Pulsed Infusion

被引：4
|
作者：
Antonucci, V. [1 ]
Ricciardi, M. R. [1 ]
Caputo, F. [2 ]
Langella, A. [3 ]
Lopresto, V. [3 ]
Riccio, A. [2 ]
Zarrelli, M. [1 ]
机构：
[1] CNR Res Natl Council, IMCB, Inst Comp & Biomed Mat, Portici, NA, Italy
[2] Univ Naples 2, Dept Aerosp & Mech Engn, Aversa, CE, Italy
[3] Univ Naples Federico II, Dept Chem Mat & Prod Engn, Naples, Italy
来源：
INTERNATIONAL SYMPOSIUM ON DYNAMIC RESPONSE AND FAILURE OF COMPOSITE MATERIALS (DRAF2014) | 2014年 / 88卷
关键词：
low velocity impacts; composite materials; indentation; pulsed infusion; DAMAGE; PENETRATION;
D O I：
10.1016/j.proeng.2014.11.149
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Carbon fibre composites were subjected to low velocity impact tests. The scope was to investigate the response of laminates fabricated by a new vacuum assisted technology, labelled as "pulse infusion", under dynamic loads. At this aim, experimental tests up to complete penetration and at a different energy levels, were carried out. Some of the specimens were destined to CAI tests and the residual strength was evaluated. All the parameters involved in the phenomenon, like penetration energy and indentation depths, were studied to validate existing semi empirical models. By the comparison with results from literature, good agreements were found denoting the efficiency of the new fabrication method. (C) 2014 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：230 / 234
页数：5
相关论文
共 50 条
  • [1] The low velocity impact response of auxetic carbon fibre laminates
    Alderson, K. L.
    Coenen, V. L.
    PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2008, 245 (03): : 489 - 496
  • [2] Effect of electrospun nanofibres and MWCNTs on the low velocity impact response of carbon fibre laminates
    Sarasini, Fabrizio
    Tirillo, Jacopo
    Bavasso, Irene
    Bracciale, Maria Paola
    Sbardella, Francesca
    Lampani, Luca
    Cicala, Gianluca
    COMPOSITE STRUCTURES, 2020, 234
  • [3] Low velocity impact response of fibre-metal laminates - A review
    Chai, Gin Boay
    Manikandan, Periyasamy
    COMPOSITE STRUCTURES, 2014, 107 : 363 - 381
  • [4] Low velocity impact response of carbon fiber laminates fabricated by pulsed infusion: A review of damage investigation and semi-empirical models validation
    Antonucci, V.
    Caputo, F.
    Ferraro, P.
    Langella, A.
    Lopresto, V.
    Pagliarulo, V.
    Ricciardi, M. R.
    Riccio, A.
    Toscano, C.
    PROGRESS IN AEROSPACE SCIENCES, 2016, 81 : 26 - 40
  • [5] Low velocity impact response of fibre metal laminates based on aramid fibre reinforced polypropylene
    Carrillo, J. G.
    Gonzalez-Canche, N. G.
    Flores-Johnson, E. A.
    Cortes, P.
    COMPOSITE STRUCTURES, 2019, 220 : 708 - 716
  • [6] Low velocity impact and axial loading response of hybrid fibre aluminium laminates
    Sudha, J.
    Vasumathi, M.
    Archana, P. V.
    Balakumar, M.
    Mohan, Jaidah
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021, 35 (11) : 4925 - 4930
  • [7] Experimental Investigation on the Low Velocity Impact Response of Fibre Foam Metal Laminates
    Jakubczak, Patryk
    Drozdziel, Magda
    Podolak, Piotr
    Pernas-Sanchez, Jesus
    MATERIALS, 2021, 14 (19)
  • [8] Low velocity impact and axial loading response of hybrid fibre aluminium laminates
    J. Sudha
    M. Vasumathi
    P. V. Archana
    M. Balakumar
    Jaidah Mohan
    Journal of Mechanical Science and Technology, 2021, 35 : 4925 - 4930
  • [9] Low velocity impact response of basalt-aluminium fibre metal laminates
    Ferrante, L.
    Sarasini, F.
    Tirillo, J.
    Lampani, L.
    Valente, T.
    Gaudenzi, P.
    MATERIALS & DESIGN, 2016, 98 : 98 - 107
  • [10] Impact Response and Damage Characteristics of Carbon Fibre Reinforced Aluminium Laminates (CARAL) under Low Velocity Impact Tests
    Rajan, B. Muthu Chozha
    Kumar, A. Senthil
    Sornakumar, T.
    Kumaar, A. Saravana
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 20070 - 20077
12345