Effects of welding parameters on tensile properties and fracture modes of resistance spot welded DP1200 steel

被引：17
作者：
Elitas, Muhammed [1 ]
机构：
[1] Bilecik Seyh Edebali Univ, Bilecik, Turkey
来源：
MATERIALS TESTING | 2021年 / 63卷 / 02期
关键词：
DP1200; steel; resistance spot welding; tensile shear properties; fracture mode; expulsion;
D O I：
10.1515/mt-2020-0019
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this study, the maximum tensile shear load bearing capacity and fracture modes of resistance spot welded DP1200 steel were investigated, and the tensile shear properties of the joints were evaluated. The effects of different welding parameters on tensile shear properties, fracture modes, microstructure, microhardness, and heat affected zone softening were examined. Weld processes were performed by using 2 to 6 bar electrode pressure as well as 5 and 7 kA weld currents. The microstructure of resistance spot welded materials was evaluated, and the hardness profiles were determined. Experimental results showed that welding current and electrode pressure had a significant effect on the load-displacement characteristics of DP1200 welds. Three different fracture modes were observed in the tensile shear loads. It was also observed that the expulsion had a negative effect on the tensile shear properties.
引用
收藏
页码：124 / 130
页数：7
相关论文
共 44 条
[1]  
Alzahougi A, 2018, ENG TECHNOL APPL SCI, V8, P3492
[2]   Effect of specimen width on the failure behavior in resistance spot weld tensile shear testing [J].
Ao, Sansan ;
Shan, He ;
Cui, Xuetuan ;
Luo, Zhen ;
Chao, Yuh J. ;
Ma, Mingtu .
WELDING IN THE WORLD, 2016, 60 (06) :1095-1107
[3]   Shunting effects on the resistance spot welding parameters of DP600 [J].
Aydin, Erencan ;
Ertan, Rukiye .
MATERIALS TESTING, 2020, 62 (01) :97-103
[4]   Tempering of Martensite in Dual-Phase Steels and Its Effects on Softening Behavior [J].
Baltazar Hernandez, V. H. ;
Nayak, S. S. ;
Zhou, Y. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (10) :3115-3129
[5]   Nanoindentation and microstructure analysis of resistance spot welded dual phase steel [J].
Baltazar Hernandez, V. H. ;
Panda, S. K. ;
Kuntz, M. L. ;
Zhou, Y. .
MATERIALS LETTERS, 2010, 64 (02) :207-210
[6]   A study on heat affected zone softening in resistance spot welded dual phase steel by nanoindentation [J].
Baltazar Hernandez, Victor Hugo ;
Panda, Sushanta Kumar ;
Okita, Yasuaki ;
Zhou, Norman Y. .
JOURNAL OF MATERIALS SCIENCE, 2010, 45 (06) :1638-1647
[7]   AN INVESTIGATION OF FAILURE TYPES IN HIGH-STRENGTH STEEL RESISTANCE SPOT WELDS [J].
Bouzekri, M. ;
Dancette, S. ;
Dupuy, T. ;
Lens, A. ;
Oultit, B. Nait ;
Massardier, V. ;
Fabregue, D. ;
Klocker, H. .
WELDING IN THE WORLD, 2010, 54 (3-4) :3-14
[8]   HAZ Microstructures and Local Mechanical Properties of High Strength Steels Resistance Spot Welds [J].
Dancette, Sylvain ;
Massardier-Jourdan, Veronique ;
Fabregue, Damien ;
Merlin, Jacques ;
Dupuy, Thomas ;
Bouzekri, Merlin .
ISIJ INTERNATIONAL, 2011, 51 (01) :99-107
[9]  
Den Uijl N.J., 2015, THESIS DELFT U TECHN, DOI [10.4233/uuid:ef6aa135-0ef3-42d5-b2a7- d270f36529ad, DOI 10.4233/UUID:EF6AA135-0EF3-42D5-B2A7-D270F36529AD]
[10]  
den Uijl N. J., 2008, WELD WORLD, V52, P18, DOI [10.1007/BF03266679, DOI 10.1007/BF03266679]
12345