Long-Term Creep and Shrinkage Behavior of Concrete-Filled Steel Tube

被引:22
作者
Nguyen, Doan-Binh [1 ]
Lin, Wei-Sheng [1 ]
Liao, Wen-Cheng [1 ]
机构
[1] Natl Taiwan Univ, Coll Engn, Dept Civil Engn, 1,Sec 4,Roosevelt Rd, Taipei 10617, Taiwan
关键词
long-term; creep; shrinkage; strain; stress; concrete filled steel tube; model; DRYING SHRINKAGE; COLUMNS;
D O I
10.3390/ma14020295
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
A concrete-filled steel tube (CFT) combines the advantages of concrete and steel in construction and structural applications. However, research on the time-dependent deformation of the CFT under long-term sustained loading are still limited, particularly for stress transfer between the steel tube and concrete due to creep. This study investigated the creep behavior of CFT over a long period of 400 days. The creep and shrinkage strain of CFT was significantly lower than those of concrete that was not confined within a steel tube. The vertical strains of the steel tube and concrete core were almost identical, and it was shown that they were well bonded and acted as a composite. The vertical stress of steel increased by 32.7%, whereas the vertical stress of concrete decreased by 15.8% at 375 days. The stress transfer is notable and cannot be neglected in CFT design. Moreover, the results of creep and shrinkage were compared to prediction values of the B4 model and B4-TW model to verify their validity.
引用
收藏
页码:1 / 23
页数:23
相关论文
共 40 条
[1]  
A. International, 2018, C39C39M18 ASTM INT
[2]  
ACI Committe 209, 2008, GUID MOD CALC SHRINK
[3]  
ACI Committee 209, 1997, PRED CREEP SHRINK TE
[4]  
[Anonymous], 2015, STANDARD TEST METHOD, DOI [DOI 10.1520/C0143_C0143M-15A, DOI 10.1520/C0143_C0143M-20, 10.1520/C0143_C0143M-15A, DOI 10.1520/C0143]
[5]  
[Anonymous], 2017, ASTM C157C157M 17
[6]  
[Anonymous], 1998, GUIDE QUALITY CONTRO
[7]  
[Anonymous], 2014, Standard Test Methods for Determining Average Grain Size, P1, DOI DOI 10.1520/C0469
[8]  
[Anonymous], 2013, Model Code for Concrete Structures 2010
[9]  
ASTM, 2019, STANDARD SPECIFICATI
[10]  
ASTM, 2018, C 1611M-18