Construction and Layout of Coordinated Multirobots System Based on Parallel Thought

被引:0
作者
Xi, Wanqiang [1 ,2 ]
Wang, Yaoyao [1 ]
Ding, Yadong [1 ]
Chen, Bai [1 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Jiangsu, Peoples R China
[2] Jiangsu Univ Technol, Coll Mech Engn, Changzhou 213001, Peoples R China
基金
中国国家自然科学基金;
关键词
STRATEGY; DESIGN; ROBOT;
D O I
10.1155/2019/9531387
中图分类号
TP24 [机器人技术];
学科分类号
080202 ; 1405 ;
摘要
Aiming at the problems that are the construction and the layout optimization of the coordinated multirobots system, the concept of an equivalent parallel robot (EPR) is proposed based on parallel thought in this paper. That is, each robot is regarded as a branched chain of the EPR in coordination. Thus, it can be converted into the problem for the type synthesis and the layout of the parallel robot. Firstly, the definition of robotic characteristic (C) set and the corresponding operational rule are given. Then, the minimum occupied area, cycle time, and condition number are used as the optimized objectives. The weight ratio is used to express the importance of the three objectives to meet the requirements of different scenes. Afterwards, based on the theory of C set, the three translational (3T) operational requirements that can be extended to other degree of freedom (DOF) are analyzed. Finally, the feasibility of the proposed methods is verified by the DOF analysis and simulation experiment. Moreover, the multiobjective layout problem is optimized based on the artificial bee colony (ABC) algorithm. The results show that the constructed robot combinations and the layout optimization method are satisfactory.
引用
收藏
页数:10
相关论文
共 24 条
  • [1] Abedinnasab M. H., 2012, SERIAL PARALLEL ROBO
  • [2] Cellular manufacturing - A time-based analysis to the layout problem
    Angra, Surjit
    Sehgal, Rakesh
    Noori, Z. Samsudeen
    [J]. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, 2008, 112 (01) : 427 - 438
  • [3] A Control Strategy for Upper Limb Robotic Rehabilitation With a Dual Robot System
    Culmer, Peter R.
    Jackson, Andrew E.
    Makower, Sophie
    Richardson, Robert
    Cozens, J. Alastair
    Levesley, Martin C.
    Bhakta, Bipin B.
    [J]. IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2010, 15 (04) : 575 - 585
  • [4] Nonlinear Friction and Dynamical Identification for a Robot Manipulator with Improved Cuckoo Search Algorithm
    Ding, Li
    Li, Xingcheng
    Li, Qilin
    Chao, Yuan
    [J]. JOURNAL OF ROBOTICS, 2018, 2018
  • [5] Chaotic Artificial Bee Colony Algorithm for System Identification of a Small-Scale Unmanned Helicopter
    Ding, Li
    Wu, Hongtao
    Yao, Yu
    [J]. INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING, 2015, 2015
  • [6] Internal Force Analysis and Load Distribution for Cooperative Multi-Robot Manipulation
    Erhart, Sebastian
    Hirche, Sandra
    [J]. IEEE TRANSACTIONS ON ROBOTICS, 2015, 31 (05) : 1238 - 1243
  • [7] Fang YF, 2002, INT J ROBOT RES, V21, P799, DOI 10.1177/0278364902021009314
  • [8] Energy-optimal layout design of robotic work cells: Potential assessment on an industrial case study
    Gadaleta, Michele
    Berselli, Giovanni
    Pellicciari, Marcello
    [J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2017, 47 : 102 - 111
  • [9] Type Synthesis of Parallel Mechanisms Having the Second Class GF Sets and Two Dimensional Rotations
    Gao, Feng
    Yang, Jialun
    Ge, Qiaode Jeffrey
    [J]. JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2011, 3 (01):
  • [10] Hosseini M, 2017, J ROBOT, V2017, DOI 10.1155/2017/3036468