Microstructure and tribological performance of a dimpled gradient nanoscale TiN layer

被引:20
|
作者
Zhang, Baosen [1 ,2 ]
Zhu, Shuaishuai [1 ,2 ]
Wang, Zhangzhong [1 ,2 ]
Zhou, Hengzhi [1 ,2 ]
机构
[1] Nanjing Inst Technol, Sch Mat Engn, Nanjing 211167, Jiangsu, Peoples R China
[2] Jiangsu Key Lab Adv Struct Mat & Applicat Technol, Nanjing 211167, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
Dimpled TiN layer; Gradient nanoscale structure; Multilayer structure; Surfaces; Glow-discharge plasma nitriding; Tribological performance; TITANIUM NITRIDE; COATINGS; DEPOSITION; ALLOY;
D O I
10.1016/j.matlet.2016.01.085
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The dimpled gradient nanoscale TiN (nano-TiN) layer was prepared on the pure Ti surface by the combined process of supersonic fine particles bombarding (SFPB) and glow-discharge plasma nitriding. A large numbers of dimples (30-40 mu m in diameter) homogenously distribute on the prepared nano-TiN layer surface and are beneficial to the reservation of oil and wear debris during friction process. The nano-TiN layer is about 25 mu m in thickness with a three-layered nanoscale structure and the grain size decreases sequentially from the outer layer to the inner one. The nano-TiN layer with higher mechanical properties displays enhanced friction and wear reducing effects compared to the SFPB-dimpled Ti surface. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:214 / 217
页数:4
相关论文
共 50 条
  • [21] Microstructure and tribological performance of CNx-TiNx composite films prepared by pulsed laser
    Zheng, X. H.
    Tu, J. P.
    Song, R. G.
    MATERIALS & DESIGN, 2010, 31 (04): : 1716 - 1719
  • [22] Microstructure and wear performance of gradient Ti/TiN metal matrix composite coating synthesized using a gas nitriding technology
    Cui, ZD
    Zhu, SL
    Man, HC
    Yang, XJ
    SURFACE & COATINGS TECHNOLOGY, 2005, 190 (2-3): : 309 - 313
  • [23] Tribological performance evaluation of (111) preferred oriented TiN duplex coatings
    Ishii, Junya
    Haruyama, Yoshio
    Kawamura, Shingo
    Horikawa, Noriyo
    Iwai, Yoshiro
    WEAR, 2009, 267 (12) : 2173 - 2178
  • [24] Microstructure characterization of gradient structured surface layer in pure zirconium
    Zhang, Conghui
    Song, Guodong
    Xin, Yunchang
    Zhu, Wenguang
    Guan, Bo
    Liang, Danying
    Zeng, Xiangkang
    MATERIALS CHARACTERIZATION, 2021, 173
  • [25] Tribological performance of GLC, WC/GLC and TiN films on the carburized M50NiL steel
    Li, Zeqing
    Zhang, Honghong
    He, Weifeng
    Xu, Lei
    Zhang, Guang'an
    Nie, Xiangfan
    Liao, Bin
    Li, Yinghong
    SURFACE & COATINGS TECHNOLOGY, 2019, 361 : 1 - 8
  • [26] Optimizing tribological property by inducing the gradient microstructure and surface topography in martensite stainless steel
    Yuan, Chun
    Yan, Xinyu
    Liu, Dan
    Yang, Jing
    Li, Shaolong
    Huang, Chaowen
    Wan, Mingpan
    MATERIALS TODAY COMMUNICATIONS, 2024, 38
  • [27] EFFECT OF DUTY CYCLE ON MICROSTRUCTURAL, MECHANICAL AND TRIBOLOGICAL PROPERTIES OF TiN LAYER DEPOSITED BY PACVD
    Mahdipoor, M. S.
    Montazeri, M.
    Soltanieh, M.
    Mahboubi, F.
    Ahangarani, Sh.
    Habibi, M. H.
    TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND ENERGY MATERIALS, 2011, : 107 - 116
  • [28] Microstructure, high-temperature oxidation and tribological performance of cold-sprayed CuCrZr coating
    Jiang, Zitao
    Yang, Kang
    Xin, Yue
    Zhang, Shihong
    Li, Wenya
    Wang, Shuoyu
    SURFACE & COATINGS TECHNOLOGY, 2023, 469
  • [29] Microstructure and Tribological Properties of Fe-Based Laser Cladding Layer on Nodular Cast Iron for Surface Remanufacturing
    Zhang, Dongya
    Li, Zhongwei
    Fan, Hongwei
    Rui, Hongbin
    Gao, Feng
    COATINGS, 2021, 11 (08)
  • [30] Tribological performance of surface treated piston assembly with infiltrated layer
    Xu, Bo
    Yin, Bifeng
    Gao, Dashu
    Hua, Xijun
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2022, 36 (01) : 197 - 204