Distribution of the Carbide Phase in the Viscoplastic Layer during the Rotational Friction-Welding of Various Steels

被引：2

作者：

Ciric, Radovan ^{[2
]}

Cantrak, Svetislav ^{[3
]}

Raic, Karlo T. ^{[1
]}

Rudolf, Rebeka ^{[4
]}

Anzel, Ivan ^{[4
]}

机构：

[1] Univ Belgrade, Fac Technol & Met, Belgrade 11120, Serbia

[2] Higher Tech Sch, Cacak 32000, Serbia

[3] Univ Belgrade, Fac Mech Engn, Belgrade 11120, Serbia

[4] Univ Maribor, FME, SLO-2000 Maribor, Slovenia

来源：

METALS AND MATERIALS INTERNATIONAL | 2009年 / 15卷 / 05期

关键词：

friction welding; steel; carbide phase; rheological model; rotational flow; KINETICS; ALLOYS;

D O I：

10.1007/s12540-009-0831-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper presents the viscoplastic phenomena observed during the rotational friction-welding process of high-speed steel M2 (AISI SAE) with carbon steel 1060 (AISI SAE). The structure, phase composition and distribution of the carbide phase in the friction plane and adjoining zones are examined by using optical microscopy (OM) with a system for quantitative analysis, and scanning electron microscopy (SEM) in addition to EDS analysis. The experimentally-checked mathematical relationship is suggested for the calculation of the radial movements of the carbide phase, immediately next to the friction plane. On the basis of qualitative and quantitative evaluation of the microstructural and rheological appearances, a model of carbide phase distribution is also established in the viscoplastic and viscous layers in the area of the friction plane.

引用

页码：831 / 841

页数：11

共 32 条

[1]

ARTINGER I, 1982, TOOL STEEL ITS HEAT

[2] Granulation, Phase Change, and Microstructure - Kinetics of Phase Change. III [J].

Avrami, M .

JOURNAL OF CHEMICAL PHYSICS, 1941, 9 (02) :177-184

[3]

BENZSAK JG, 1996, T JWRI, V25, P171

[4] In-situ monitoring of internal oxidation of dilute alloys [J].

Bruncko, M. ;

Anzel, I. ;

Kneissl, A. .

CORROSION SCIENCE, 2007, 49 (03) :1228-1244

[5]

CANTRAK S, 1998, MEHANIKA FLUIDA, P95

[6] Modeling friction stir welding process of aluminum alloys [J].

Cho, J. -H. ;

Kang, S. H. ;

Han, H. N. ;

Oh, K. H. .

METALS AND MATERIALS INTERNATIONAL, 2008, 14 (02) :247-258

[7]

CIRIC R, 2005, P 58 ANN ASS INT C I, P157

[8]

CIRIC R, 2007, THESIS U BELGRADE

[9]

CIRIC R, 2004, AVTOMATICESKAYA SVAR, V12, P17

[10]

DENNIN G, 1979, FACHINFORMATION KUKA

← 1 2 3 4 →