Process modeling of hydrodeoxygenation to produce renewable jet fuel and other hydrocarbon fuels

The focus of this work is to model the hydrodeoxygenation process to produce renewable jet fuel and co-products from low-input oilseeds, specifically camelina, carinata (non-edible oil) and used cooking oil (UCO), taking into account the fatty acid compositions by incorporating the stoichiometric hydrodeoxygenation reactions. This methodology provides insight into the effect of feedstock composition and hydrodeoxygenation reactions upon product yields, product distribution, hydrogen consumption and process utilities. The resulting product slates, hydrogen gas and utility demands are specific to each of the camelina, carinata and UCO feedstocks. The yield of kerosene-range alkanes ranged from 53 to 54% of the incoming oil, with 13-14% diesel range alkanes, 13-15% naphtha, and 7-9% liquefied petroleum gas, depending upon the fatty acid composition. The hydrogen consumption rate ranged from 26 to 30 kg per tonne of incoming oil, depending upon the degree of bond unsaturation. Thermal energy demand is 2.8 GJ/tonne oil when processing used cooking oil, versus 5.2 and 5.7 GJ/tonne of oil for carinata and camelina, respectively, owing to the additional energy required for oil extraction. Electricity demand was 73 kWh/tonne oil for UCO, versus 170 and 227 kWh/tonne oil for carinata and camelina. (C) 2017 Elsevier Ltd. All rights reserved.