Short and long crack growth behavior of welded ferritic stainless steel

被引：2

作者：

Abecassis, Manon ^{[1
]}

Koster, Alain ^{[1
]}

Maurel, Vincent ^{[1
]}

机构：

[1] PSL Res Univ, MAT Ctr Mat, CNRS, MINES ParisTech,UMR 7633, BP 87, F-91003 Evry, France

来源：

21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) | 2016年 / 2卷

关键词：

Ferritic stainless steel; weldment; crack growth modelling; grain size gradient; JOINT; SOLIDIFICATION; PROPAGATION; RESISTANCE;

D O I：

10.1016/j.prostr.2016.06.438

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

To analyze the influence of welding on fatigue crack growth, several geometrical configurations have been tested using notched specimens with notch located within base metal and welded joint. This methodology has shown that fatigue crack growth rate was similar for base metal and welded part for the ferritic stainless steel F18TNb (corresponding to AISI 441 or EN 1.4509 grades) considering long crack. Whereas for short crack, the microstructure induced by the welding process was evidenced to drastically increase the resulting crack growth rate. The tested configurations have been systematically modeled by finite element analysis to obtain reliable shape function and SIF assessment for the chosen geometries. Then fatigue crack growth behavior is discussed on the basis of both SIF values and the influence of microstructure in crack path and crack growth rate. Copyright (C) 2016 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license.

引用

页码：3515 / 3522

页数：8

共 18 条

[1]

Bucher L., 2004, THESIS

[2] An adaptive algorithm for cohesive zone model and arbitrary crack propagation [J].

Chiaruttini, Vincent ;

Geoffroy, Dominique ;

Riolo, Vincent ;

Bonnet, Marc .

EUROPEAN JOURNAL OF COMPUTATIONAL MECHANICS, 2012, 21 (3-6) :208-218

[3] MEASUREMENT OF FATIGUE CRACKS IN NOTCHED SPECIMENS BY MEANS OF THEORETICAL ELECTRICAL POTENTIAL CALIBRATIONS [J].

CLARK, G ;

KNOTT, JF .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1975, 23 (4-5) :265-276

[4] Calibration of the potential drop method for monitoring small crack growth from surface anomalies - Crack front marking technique and finite element simulations [J].

Doremus, L. ;

Nadot, Y. ;

Henaff, G. ;

Mary, C. ;

Pierret, S. .

INTERNATIONAL JOURNAL OF FATIGUE, 2015, 70 :178-185

[5] Cracked weld joint and yield strength dissimilarity on crack tip stress triaxiality [J].

Fu, JQ ;

Shi, YW .

THEORETICAL AND APPLIED FRACTURE MECHANICS, 1996, 25 (01) :51-57

[6] DC ELECTRIC-POTENTIAL METHOD APPLIED TO THERMAL MECHANICAL FATIGUE CRACK-GROWTH [J].

HARTMAN, GA ;

JOHNSON, DA .

EXPERIMENTAL MECHANICS, 1987, 27 (01) :106-112

[7]

Kusko CS, 2004, WELD J, V83, p6S

[8]

Masayuki A., 2006, MATER DESIGN, V27, P92

[9]

Missoum-Benziane D., 2011, 10 C NAT CALC STRUCT, P8

[10] FATIGUE CRACK-PROPAGATION RATES AND THRESHOLD STRESS INTENSITY FACTORS FOR WELDED-JOINTS OF HT80 STEEL AT SEVERAL STRESS RATIOS [J].

OHTA, A ;

SASAKI, E ;

NIHEI, M ;

KOSUGE, M ;

KANAO, M ;

INAGAKI, M .

INTERNATIONAL JOURNAL OF FATIGUE, 1982, 4 (04) :233-237

← 1 2 →