Characteristics of boundary layer under microscale flow and regulation mechanism of nanomaterials on boundary layer

被引:2
|
作者
Xiao, Liangfei [1 ]
You, Qing [1 ]
Zhang, Yan [2 ]
Li, Yuyang [3 ]
Wang, Pan [1 ]
Ding, Xingxing [1 ]
Jiang, Yuanyuan [4 ]
机构
[1] China Univ Geosci, Sch Energy Resources, Beijing 100083, Peoples R China
[2] CNPC Engn Technol R&D Co Ltd, Beijing 102206, Peoples R China
[3] Univ Jinan, Sch Chem & Chem Engn, Jinan 250022, Peoples R China
[4] Changqing Oilfield Co China, Natl Petr Corp, Xian 710000, Peoples R China
基金
中国国家自然科学基金;
关键词
Boundary layer; Porous media; Microscale flow; Nanomaterials; Regulation; NANOPARTICLES; NANOFLUID; WETTABILITY; RESERVOIRS; WATER;
D O I
10.1016/j.molliq.2022.120616
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
As a new functional material that can effectively reduce displacement pressure and increase injection, nanomaterials have attracted much attention in the development and research of tight oil and gas reser-voirs with a low permeability. At present, the research on the technology of decreasing displacement pressure and increasing injection by nanomaterials, mostly focuses on improving the interface properties of nanomaterials such as wall wettability and roughness, and evaluates the performance from the macro -level to clarify the influence and application prospect of nanomaterials. However, there are relatively few studies on the micro influence of nanomaterials on fluid flow. At the same time, owing to the existence of a boundary layer in the pores of a tight reservoir with a low permeability, the fluid flow characteristics are also substantially different from those under the condition of a conventional-size flow channel. In this study, a porous medium was constructed with glass beads to simplify the physical model, and the vari-ation trend of the boundary layer thickness under different treatment conditions and flow channel sizes was clarified through centrifugal experiments, and a formula that can effectively describe the variation in boundary layer thickness with displacement pressure was established, consistent with the functional relationship d = d0 + A x exp [-(Grad DP -B) / C]. Using the relationship, the static boundary layer thick-ness d0 can be obtained. In addition, the regulation of nanomaterials on the thickness of the boundary layer was clarified. The results show that nanomaterials can effectively reduce the thickness of the boundary layer of the fluid in the flow channel, and their performance for this thickness reduction increases with the increase in the wall hydrophobicity after nanomaterials are adsorbed. The smaller the scale of the flow channel, the more clear the regulation effect. In this study, the influence of nanoma-terials on the regulation of boundary layer during the fluid flow under a microscale flow channel was clarified from the micro-level. The mechanism for displacement pressure decrease and injection increase of nanomaterials was further elucidated, which is important for the application of nanomaterials in tight reservoirs with a low permeability.(c) 2022 Elsevier B.V. All rights reserved.
引用
收藏
页数:12
相关论文
共 50 条
  • [21] Boundary Layer Flow and Heat Transfer Characteristics Over a Moving Plate in a Stable Stratified Nanofluid
    Omar, Noor Syamimi
    Bachok, Norfifah
    Arifin, Norihan Md.
    JOURNAL OF NANOFLUIDS, 2016, 5 (06) : 935 - 940
  • [22] Radiation effect on Marangoni convection boundary layer flow of a nanofluid
    Mat N.A.A.
    Arifin N.M.
    Nazar R.
    Ismail F.
    Mathematical Sciences, 2012, 6 (1)
  • [23] Boundary-layer flow of a nanofluid past a stretching sheet
    Khan, W. A.
    Pop, I.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (11-12) : 2477 - 2483
  • [24] BOUNDARY LAYER DEVELOPMENT UNDER BREAKING WAVE
    Binh, Nguyen Thai
    Mitobe, Yuta
    Tanaka, Hitoshi
    Tinh, Nguyen Xuan
    PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON ASIAN AND PACIFIC COASTS, APAC 2019, 2020, : 767 - 771
  • [25] Wave surface of boundary layer
    Li, Wei
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2010, 34 (07) : 838 - 844
  • [26] RANS modelling of the turbulent boundary layer under a solitary wave
    Blondeaux, Paolo
    Vittori, Giovanna
    COASTAL ENGINEERING, 2012, 60 : 1 - 10
  • [27] Effect of Cascade Surface Roughness on Boundary Layer Flow Under Variable Conditions
    Liu, C.
    Li, Y.
    Zhou, Z.
    Wisniewski, P.
    FRONTIERS IN ENERGY RESEARCH, 2022, 9
  • [28] Feedback between windblown dust and planetary boundary-layer characteristics: Sensitivity to boundary and surface layer parameterizations
    Choobari, O. Alizadeh
    Zawar-Reza, P.
    Sturman, A.
    ATMOSPHERIC ENVIRONMENT, 2012, 61 : 294 - 304
  • [29] Characteristics of the Marine Atmospheric Boundary Layer under the Influence of Ocean Surface Waves
    Liu, Changlong
    Li, Xinyu
    Song, Jinbao
    Zou, Zhongshui
    Huang, Jian
    Zhang, Jun A.
    Jie, Ganxin
    Wang, Jun
    JOURNAL OF PHYSICAL OCEANOGRAPHY, 2022, 52 (06) : 1261 - 1276
  • [30] Boundary Layer Flow for a Nanofluid Over a Flat Plate with a Convective Boundary Condition
    Mansur, Syahira
    Ishak, Anuar
    INTERNATIONAL CONFERENCE ON MATHEMATICAL SCIENCES AND STATISTICS 2013 (ICMSS2013), 2013, 1557 : 180 - 185