Effect of Mn on solubility of Ti-sulfide and Ti-carbosulfide in ultra-low C steels

被引:10
|
作者
Mizui, Naomitsu [1 ]
Takayama, Toru [1 ]
Sekine, Kazuyoshi [2 ]
机构
[1] Sumitomo Met Ind Ltd, Corp Reasarch & Dev Labs, Amagasaki, Hyogo 6600891, Japan
[2] Yokohama Natl Univ, Grad Sch Environm & Informat Sci, Hodogaya Ku, Yokohama, Kanagawa 2408501, Japan
关键词
ultra-low C steel; Ti; sulfide; carbosulfide; Mn; solubility;
D O I
10.2355/isijinternational.48.845
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
To clarify the thermodynamic stability of Ti(4)C(2)S(2) and TiS in ULC Ti-added IF steels, extraction by potentiostatic electrolysis method and chemical analysis were conducted with ULC Ti-added IF steels containing various amounts of Mn and heated at various temperatures. As the results, the solubilities of Ti(4)C(2)S(2) and TiS increased with an increase in Mn content. Ti(4)C(2)S(2) was more stable than TiS between 950 and 1250 degrees C. Following solubility products were obtained. log[Ti] . [C](0.5) . [S](0.5) = 0.392-7 004/T-(4.783-7 401/T) . [Mn] log[Ti](2/3) . [S] = -0.021-5.847/T-(3.360-5 195/T) . [Mn].
引用
收藏
页码:845 / 850
页数:6
相关论文
共 50 条
  • [41] Influence of undercooling thermal cycle on hot ductility of C-Mn-Al-Ti and C-Mn-Al-Nb-Ti steels
    Spradbery, C
    Mintz, B
    IRONMAKING & STEELMAKING, 2005, 32 (04) : 319 - 324
  • [42] Effect of Ti and C Contents on Prior Austenite Grain Size in Ti Added Steels
    Kim, Woo Jin
    Kang, Namhyun
    Kim, Sung Ju
    Do, Hyung Hyup
    Nam, Daegeun
    Cho, Kyung-Mox
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2011, 21 (04): : 187 - 191
  • [43] Effect of Ti(CN) Precipitation on Texture Evolution and Fish-Scale Resistance of Ultra-Low Carbon Ti-Bearing Enamel Steel
    Fu-tao Dong
    Lin-xiu Du
    Xiang-hua Liu
    Jun Hu
    Fei Xue
    Journal of Iron and Steel Research International, 2013, 20 : 39 - 45
  • [44] Obtaining ultrafine ferrite grains in C-Mn and C-Mn-Nb-Ti steels
    Santos, Dagoberto Brandão
    Metalurgia e Materiais, 2006, 62 (572): : 598 - 601
  • [45] EFFECT OF SI ON THE MECHANICAL PROPERTY OF ULTRA-LOW CARBON TI-ADDED COLD-ROLLED SHEET STEELS WITH VARIOUS CONTENT OF MN OR P, COILED AT 500-DEGREES-C IN HOT-ROLLING PROCESS
    MIZUI, N
    KOJIMA, N
    ISIJ INTERNATIONAL, 1994, 34 (01) : 123 - 131
  • [46] Thermodynamic analysis of precipitation behaviors of Ti, Mn sulfide in hot-rolled steels sheets
    Yamashita, Takako
    Okuda, Kaneharu
    Yasuhara, Eiko
    Satoh, Kaoru
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2007, 93 (08): : 538 - 543
  • [47] Effect of boron on recrystallization behavior in ultra-low carbon martensitic steels
    Futamura, Y
    Kawamura, T
    Tsuchiyama, T
    Takaki, S
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2003, 89 (03): : 335 - 341
  • [48] Cleavage fracture micromechanisms in Ti, Ti-V and C-Mn-B microalloyed bainitic steels
    Echeverria, A
    Linaza, MA
    Rodriguez-Ibabe, JM
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MICROALLOYING IN STEELS, 1998, 284-2 : 351 - 358
  • [49] Effect of precipitate size and dispersion on recrystallization behavior in Ti-added ultra low carbon steels
    Shin, EJ
    Seong, BS
    Han, YS
    Hong, KP
    Lee, CH
    Kang, HJ
    JOURNAL OF APPLIED CRYSTALLOGRAPHY, 2003, 36 (01): : 624 - 628
  • [50] Hot deformation and recrystallisation of low Mn steels with different Ti/N ratio
    Dehghan-Manshadi, A.
    Dippenaar, R. J.
    IRONMAKING & STEELMAKING, 2011, 38 (04) : 302 - 308