Effect of Mn on solubility of Ti-sulfide and Ti-carbosulfide in ultra-low C steels

被引：10

作者：

Mizui, Naomitsu ^{[1
]}

Takayama, Toru ^{[1
]}

Sekine, Kazuyoshi ^{[2
]}

机构：

[1] Sumitomo Met Ind Ltd, Corp Reasarch & Dev Labs, Amagasaki, Hyogo 6600891, Japan

[2] Yokohama Natl Univ, Grad Sch Environm & Informat Sci, Hodogaya Ku, Yokohama, Kanagawa 2408501, Japan

来源：

ISIJ INTERNATIONAL | 2008年 / 48卷 / 06期

关键词：

ultra-low C steel; Ti; sulfide; carbosulfide; Mn; solubility;

D O I：

10.2355/isijinternational.48.845

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

To clarify the thermodynamic stability of Ti(4)C(2)S(2) and TiS in ULC Ti-added IF steels, extraction by potentiostatic electrolysis method and chemical analysis were conducted with ULC Ti-added IF steels containing various amounts of Mn and heated at various temperatures. As the results, the solubilities of Ti(4)C(2)S(2) and TiS increased with an increase in Mn content. Ti(4)C(2)S(2) was more stable than TiS between 950 and 1250 degrees C. Following solubility products were obtained. log[Ti] . [C](0.5) . [S](0.5) = 0.392-7 004/T-(4.783-7 401/T) . [Mn] log[Ti](2/3) . [S] = -0.021-5.847/T-(3.360-5 195/T) . [Mn].

引用

页码：845 / 850

页数：6

共 50 条

[21] Effect of Si on the mechanical property of ultra-low carbon Ti-added cold-rolled sheet steels with various content of Mn or P, coiled at 500°C in hot rolling process
Mizui, Naomitsu
Kojima, Nobusato
ISIJ International, 1994, 34 (01): : 123 - 131
[22] Mechanical properties and microstructures of ferritic-rolled ultra-low carbon (ULC) and Ti-stabilized interstitial-free (Ti-IF) steels
Han, Futao
Wang, Zuocheng
Jing, Cainian
Zhang, Wenping
PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 1657 - 1660
[23] Effect of Mn and P on precipitation behavior and solute distribution in ultra-low carbon bake hardening steels
Hua Wang
Naqiong Zhu
Wen Shi
Lin Li
Rendong Liu
Journal of Materials Science, 2011, 46 : 2982 - 2990
[24] Effect of Mn and P on precipitation behavior and solute distribution in ultra-low carbon bake hardening steels
Wang, Hua
Zhu, Naqiong
Shi, Wen
Li, Lin
Liu, Rendong
JOURNAL OF MATERIALS SCIENCE, 2011, 46 (09) : 2982 - 2990
[25] Effect of hot band microstructural factors on recrystallization texture in Ti-added ultra-low carbon cold-rolled sheet steels
Tsukatani, I
ISIJ INTERNATIONAL, 1998, 38 (06) : 625 - 632
[26] Effect of hot band microstructural factors on recrystallization texture in Ti-added ultra-low carbon cold-rolled sheet steels
Kobe Steel Ltd, Hyogo-ken, Japan
ISIJ Int, 6 (625-632):
[27] EFFECT OF CARBURIZING AFTER RECRYSTALLIZATION ON FORMABILITY AND BAKE HARDENABILITY OF ULTRA-LOW CARBON TI-ADDED COLD-ROLLED SHEET STEELS
KITAMURA, M
TSUKATANI, I
INOUE, T
ISIJ INTERNATIONAL, 1994, 34 (01) : 115 - 122
[28] Microstructure and properties of Ti and Ti+Nb ultra-low-carbon bake hardened steels
Ji-ping Chen
Yong-lin Kang
Ying-min Hao
Guang-ming Liu
Ai-ming Xiong
Journal of Iron and Steel Research International, 2009, 16 : 33 - 40
[29] Microstructure and Properties of Ti and Ti+Nb Ultra-Low-Carbon Bake Hardened Steels
CHEN Ji-ping1
2.Shougang Research Institute ofTechnology
JournalofIronandSteelResearch(International), 2009, 16 (06) : 33 - 40
[30] Microstructure and Properties of Ti and Ti plus Nb Ultra-Low-Carbon Bake Hardened Steels
Chen Ji-ping
Kang Yong-lin
Hao Ying-min
Liu Guang-ming
Xiong Ai-ming
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2009, 16 (06) : 33 - 40

← 1 2 3 4 5 →