Mode I fracture mechanism of direct shearing specimen with guiding grooves of rock

Fracture mechanism of direct shear specimen with guiding grooves of rock was investigated experimentally and numerically in order to explore a favorable stress condition for creating Mode II fracture and guide design of specimen configuration for determining Mode II fracture toughness of rock, K(IIC). The experimental and numerical results demonstrate that Mode II fracture can be successfully achieved in the direct shearing specimen with guiding groove because the guiding grooves added in the notch plane can generate a favorable stress condition for Mode II fracture, i.e. tensile stress at the notch tip is completely depressed and shear stress at the notch tip is very high in the notch plane. The optimum design of the specimen configuration for K(IIC) testing should aim to reduce tensile stress to be compressive stress or be lower than tensile strength and greatly increase shear stress at crack tip.