Effect of process parameters on the formation of Ti-Al coatings fabricated by mechanical milling

被引：45

作者：

Romankov, S. ^{[1
]}

Kaloshkin, S. D. ^{[2
]}

Hayasaka, Y. ^{[3
]}

Hayashi, N. ^{[1
]}

Kasai, E. ^{[1
]}

Komarov, S. V. ^{[4
]}

机构：

[1] Tohoku Univ, Inst Multidisciplinary Res Adv Mat, Sendai, Miyagi 9808577, Japan

[2] Moscow State Inst Steel & Alloys, Moscow 119049, Russia

[3] Tohoku Univ, High Voltage Elect Microscope Lab, Sendai, Miyagi 9808577, Japan

[4] Nippon Light Met Co Ltd, NRDC, Shizuoka 4213291, Japan

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2009年 / 484卷 / 1-2期

关键词：

Coating; Mechanical milling; Ti-Al; Microstructure; Nanostructure; ALLOYING METHOD; TITANIUM-ALLOY; NANOCOMPOSITE; PROTECTION; OXIDATION; BEHAVIOR;

D O I：

10.1016/j.jallcom.2009.05.016

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

A vibration technique was used to fabricate Ti-Al coatings. During mechanical milling, the sample surface was subjected to high-energy ball impacts. The powder particles trapped between the balls and substrate became cold-welded to the substrate surface. The repeated substrate-to-ball collisions flattened the particles and forged them onto the surface into a bulk material. The coating thickness and roughness can be optimized by the combinations of key factors such as the ball-to-powder weight ratio, milling duration, and ball size. The development of the coating structure is associated with the milling intensity. A Ti-Al coating formed rapidly as the milling intensity increased. Prolonged milling led to structural refinement of the top coating layer. The grain size may reach the nanometer scale under prolonged milling. The ball size was critical to coating formation. (C) 2009 Elsevier B.V. All rights reserved.

引用

页码：665 / 673

页数：9

共 21 条

[1] Advanced thermal spray technology and coating for lightweight engine blocks for the automotive industry [J].

Barbezat, G .

SURFACE & COATINGS TECHNOLOGY, 2005, 200 (5-6) :1990-1993

[2] The tribological properties of co-deposited aluminium-titanium alloy coatings [J].

Hampshire, J ;

Kelly, PJ ;

Teer, DG .

THIN SOLID FILMS, 2004, 447 :392-398

[3] Development and characterization of low friction coatings for protection against fretting wear in aerospace components [J].

Korsunsky, Alexander M. ;

Torosyan, Aghasi R. ;

Kim, Kyungmok .

THIN SOLID FILMS, 2008, 516 (16) :5690-5699

[4] Intermetallic Ti-Al coatings for protection of titanium alloys: oxidation and mechanical behavior [J].

Leyens, C ;

Peters, M ;

Kaysser, WA .

SURFACE & COATINGS TECHNOLOGY, 1997, 94-5 (1-3) :34-40

[5]

[Lu L. K.A. Publishers K.A. Publishers], 1998, MECH ALLOYING, P276, DOI DOI 10.1007/978-1-4615-5509-4

[6] Microstructure, mechanical properties and oxidation behavior of the TiAl(Si,Ag) coating on near-α titanium alloy [J].

Moskalewicz, T. ;

Wendler, B. ;

Smeacetto, F. ;

Salvo, M. ;

Manescu, A. ;

Czyrska-Filemonowicz, A. .

SURFACE & COATINGS TECHNOLOGY, 2008, 202 (24) :5876-5881

[7] Coating metals by surface mechanical attrition treatment [J].

Revesz, A. ;

Takacs, L. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 441 (1-2) :111-114

[8] Fabrication of Ti-Al composite coatings by the mechanical alloying method [J].

Roman'kov, S. E. ;

Sagdoldina, Zh. B. ;

Kaloshkin, S. D. ;

Kaevitser, E. V. .

PHYSICS OF METALS AND METALLOGRAPHY, 2008, 106 (01) :67-75

[9] Pulsed plasma treatment of Ti-Al coatings produced by mechanical alloying method [J].

Romankov, S. ;

Mamaeva, A. ;

Kaloshkin, S. D. ;

Komarov, S. V. .

MATERIALS LETTERS, 2007, 61 (30) :5288-5291

[10] Fabrication of Ti-Al coatings by mechanical alloying method [J].

Romankov, S. ;

Sha, W. ;

Kaloshkin, S. D. ;

Kaevitser, K. .

SURFACE & COATINGS TECHNOLOGY, 2006, 201 (06) :3235-3245

← 1 2 3 →