Cavitation erosion and erosion-corrosion resistance of austenitic stainless steel by plasma transferred arc welding

被引:37
作者
Zhang, S. [1 ]
Wang, S. [1 ]
Wu, C. L. [1 ]
Zhang, H. [1 ]
Guan, M. [2 ]
Tan, J. Z. [2 ]
机构
[1] Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang 110870, Liaoning, Peoples R China
[2] Shenyang Blower Works Grp Corp, Shenyang 110869, Liaoning, Peoples R China
基金
中国国家自然科学基金;
关键词
In situ synthesis; Cavitation erosion; Erosion-corrosion; Colmonoy75; Colmonoy88; HIGH-ENTROPY ALLOY; IN-SITU SYNTHESIS; SURFACING PROCESS; COATINGS; WEAR; BEHAVIOR; NI; MICROSTRUCTURE; MECHANISMS; EVOLUTION;
D O I
10.1016/j.engfailanal.2017.02.007
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
41WC-36Ni7.5CrSiB (Colmonoy75) and NiCrBSiW (Colmonoy88) alloy coatings were synthesized on 316 L stainless steel by plasma transferred arc welding, aiming at improving cavitation erosion and erosion-corrosion resistance. The microstructure, chemical composition, phase constituents and microhardness were determined by using SEM, EDS, XRD and microhardness tester. The cavitation erosion and erosion-corrosion experiments of the coatings were investigated using an ultrasonic vibrator and a jet erosion testing measurement in 3.5 wt% NaCl solution, respectively. Experimental results showed that the coatings with few pores, cracks or other defects could be obtained. The microstructure of the Colmonoy75 and Colmonoy88 coatings exhibited cellular dendrite and irregular blocky phases. The two coatings were composed of gamma- Ni solid solution and WC particles, while the formation mechanism of WC was different. In the cavitation erosion and erosion-corrosion tests, the cumulative volume losses of the two coatings were much lower than that of the substrate. Colmonoy88 coating exhibited a better resistance to cavitation erosion and erosion-corrosion than Colmonoy75 coating. The cavitation erosion and erosion- corrosion resistance of the Colmonoy75 coating could reach about 3 times and 8 times that of 316 L substrate, while the Colmonoy88 coating could reach about 12 times and 31 times that of 316 L substrate, respectively. The improvment in the cavitation erosion and erosion-corrosion resistance for Colmonoy88 coating could be attributed to the fact that the in situ synthesized WC particles increased the cavitation erosion and erosion- corrosion resistance by providing an anchoring effect on the solid solutions to hinder the nucleation and propagation of cracks. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:115 / 124
页数:10
相关论文
共 40 条
[1]  
*ASTM, G3292 ASTM
[2]   An Experimental Study on Slurry Erosion Resistance of Single and Multilayered Deposits of Ni-WC Produced by Laser-Based Powder Deposition Process [J].
Balu, Prabu ;
Hamid, Syed ;
Kovacevic, Radovan .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (11) :3398-3413
[3]   Microstructure and wear properties of nickel-based surfacing deposited by plasma transferred arc welding [J].
Chen Guoqing ;
Fu Xuesong ;
Wei Yanhui ;
Li Shan ;
Zhou Wenlong .
SURFACE & COATINGS TECHNOLOGY, 2013, 228 :S276-S282
[4]   NiTi cladding on stainless steel by TIG surfacing process Part I. Cavitation erosion behavior [J].
Cheng, FT ;
Lo, KH ;
Man, HC .
SURFACE & COATINGS TECHNOLOGY, 2003, 172 (2-3) :308-315
[5]   Cavitation erosion resistance of AISI 316L stainless steel laser surface-modified with NiTi [J].
Chiu, KY ;
Cheng, FT ;
Man, HC .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 392 (1-2) :348-358
[6]   Metal-matrix composite coatings by PTA surfacing [J].
Deuis, RL ;
Yellup, JM ;
Subramanian, C .
COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (02) :299-309
[7]   Laser cladding of in situ TiB2/Fe composite coating on steel [J].
Du, Baoshuai ;
Zou, Zengda ;
Wang, Xinhong ;
Qu, Shiyao .
APPLIED SURFACE SCIENCE, 2008, 254 (20) :6489-6494
[8]   In situ synthesis of TiB2/Fe composite coating by laser cladding [J].
Du, Baoshuai ;
Zou, Zengda ;
Wang, Xinhong ;
Qu, Shiyao .
MATERIALS LETTERS, 2008, 62 (4-5) :689-691
[9]   On the mechanisms of cavitation erosion - Coupling high speed videos to damage patterns [J].
Dular, Matevz ;
Petkovsek, Martin .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2015, 68 :359-370
[10]   Comparative study of the slurry erosion behavior of laser cladded Ni-WC coating modified by nanocrystalline WC and La2O3 [J].
Farahmand, Parisa ;
Frosell, Thomas ;
McGregor, Molly ;
Kovacevic, Radovan .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 79 (9-12) :1607-1621