An assisted heating tool design for FSW of thermoplastics

被引：48

作者：

Banjare, Pragya N. ^{[1
]}

Sahlot, Pankaj ^{[1
]}

Arora, Amit ^{[1
]}

机构：

[1] Indian Inst Technol Gandhinagar, Mat Sci & Engn, Palaj 382355, Gandhinagar, India

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2017年 / 239卷

关键词：

Friction stir welding; Thermoplastics; Joining; Tool design; Polymer processing; PROCESS PARAMETERS; MECHANICAL-PROPERTIES; FRICTION; OPTIMIZATION; STRENGTH; GEOMETRY;

D O I：

10.1016/j.jmatprotec.2016.07.035

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An assisted heating tool design was used to obtain better weld surface finish, and lower chip formation and material loss during friction stir welding (FSW) of thermoplastics. The welded coupons of polypropylene with various tool rotational speeds were tested under tensile loading to test the efficiency of the tool design. The proposed tool improved the tensile strength of friction stir welded coupons of polypropylene and also produced the welds with more ductility than the conventional FSW tool without additional heating. Lack of heat, the reason for improper fusion and void formation during FSW of thermoplastics, was avoided by the proposed tool design. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：83 / 91

页数：9

共 17 条

[1]

[Anonymous], [No title captured]

[2] Effects of double passes of the tool on friction stir welding of polyethylene [J].

Arici, A ;

Sinmazcelik, T .

JOURNAL OF MATERIALS SCIENCE, 2005, 40 (12) :3313-3316

[3] An experimental study on mechanical properties of friction stir welded ABS sheets [J].

Bagheri, Arvin ;

Azdast, Taher ;

Doniavi, Ali .

MATERIALS & DESIGN, 2013, 43 :402-409

[4] Influence of tool geometry and process parameters on macrostructure and static strength in friction stir spot welded polyethylene sheets [J].

Bilici, Mustafa Kemal ;

Yukler, Ahmet Irfan .

MATERIALS & DESIGN, 2012, 33 :145-152

[5] The influence of stirrer geometry on bonding and mechanical properties in friction stir welding process [J].

Boz, M ;

Kurt, A .

MATERIALS & DESIGN, 2004, 25 (04) :343-347

[6] The optimization of friction stir welding process parameters to achieve maximum tensile strength in polyethylene sheets [J].

Bozkurt, Yahya .

MATERIALS & DESIGN, 2012, 35 :440-445

[7] Optimization of process parameters on friction stir welding of high density polypropylene plate [J].

Jaiganesh, V ;

Maruthu, B. ;

Gopinath, E. .

12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 :1957-1965

[8]

Kiss Z., 2008, PERIOD POLYTECH MECH, V51, P15

[9] Recent advances in friction-stir welding - Process, weldment structure and properties [J].

Nandan, R. ;

DebRoy, T. ;

Bhadeshia, H. K. D. H. .

PROGRESS IN MATERIALS SCIENCE, 2008, 53 (06) :980-1023

[10]

Nelson T.W., 2004, U.S. Patent, Patent No. [6,811,632, 6811632]

← 1 2 →