Microstructure and mechanical properties of a directionally solidified Al2O3/Y3Al5O12/ZrO2 hypoeutectic in situ composite

被引：30

作者：

Su, Haijun ^{[1
]}

Zhang, Jun ^{[1
]}

Liu, Lin ^{[1
]}

Fu, Hengzhi ^{[1
]}

机构：

[1] NW Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2009年 / 69卷 / 15-16期

基金：

中国国家自然科学基金;

关键词：

Ceramic-matrix composites (CMCs); Fracture toughness; Crack; Microstructure and properties; Directional solidification; MELT-GROWTH COMPOSITES; RAPID SOLIDIFICATION; EUTECTIC COMPOSITE; FRACTURE-BEHAVIOR; MATRIX COMPOSITES; HIGH-STRENGTH; 1900; K; TEMPERATURE; AL2O3-Y3AL5O12; DEFORMATION;

D O I：

10.1016/j.compscitech.2009.08.007

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Directionally solidified ternary Al2O3/Y3Al5O12(YAG)/ZrO2 hypoeutectic rod composites were successfully fabricated by the laser zone remelting technique. The microstructure and mechanical properties of the composite were investigated. The microstructure presented a complex three-dimensional network structure consisting of fine Al2O3 (41 vol.%) and YAG (49 vol.%) phases, with smaller ZrO2 (10 vol.%) phases partially distributed at the Al2O3/YAG interfaces. The irregular growth behavior in the hypoeutectic was revealed. The hardness and fracture toughness at ambient temperature were measured to be 17.3 GPa and 5.2 MPa m(1/2), respectively. The toughness enhancement in comparison with previous binary Al2O3/YAG composites was mainly attributed to the refined microstructure, and crack deflection, branching and bridging. Moreover, the residual stresses, generated by different thermal expansion coefficients of the component phases, also importantly contributed to the improved toughness. Correlations between the addition of the third component ZrO2 and the microstructure and properties were discussed as well. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：2657 / 2667

页数：11

共 44 条

[1] Directional solidification and microstructures of near-eutectic Cr-Cr3Si alloys [J].

Bei, H ;

George, EP ;

Kenik, EA ;

Pharr, GM .

ACTA MATERIALIA, 2003, 51 (20) :6241-6252

[2] Interfacial fracture mechanisms in solid solution directionally solidified eutectic oxide composites [J].

Brewer, LN ;

Guruz, MU ;

Dravid, VP .

ACTA MATERIALIA, 2004, 52 (13) :3781-3791

[3] Al2O3-Y3Al5O12(YAG)-ZrO2 ternary composite rapidly solidified from the eutectic melt [J].

Calderon-Moreno, JM ;

Yoshimura, M .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2005, 25 (08) :1365-1368

[4] Microstructure and mechanical properties of quasi-eutectic Al2O3-Y3Al5O12-ZrO2 ternary composites rapidly solidified from melt [J].

Calderon-Moreno, JM ;

Yoshimura, M .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :1246-1249

[5] Effect of Mo on microstructure and mechanical behaviour of as-cast NbSS-Nb5Si3 in situ composites [J].

Chattopadhyay, K. ;

Balachandran, G. ;

Mitra, R. ;

Ray, K. K. .

INTERMETALLICS, 2006, 14 (12) :1452-1460

[6] Microstructure, mechanical performance and oxidation mechanism of boride in situ composites [J].

Chen, CM ;

Zhang, LT ;

Zhou, WC ;

Hao, ZZ ;

Jiang, YJ ;

Yang, SL .

COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (07) :971-975

[7] SOLIDIFICATION MICROSTRUCTURE OF Y2O3-ADDED AL2O3-ZRO2 EUTECTIC [J].

ECHIGOYA, J ;

TAKABAYASHI, Y ;

SASAKI, K ;

HAYASHI, S ;

SUTO, H .

TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1986, 27 (02) :102-107

[8] CRACK DEFLECTION PROCESSES .1. THEORY [J].

FABER, KT ;

EVANS, AG .

ACTA METALLURGICA, 1983, 31 (04) :565-576

[9] High temperature creep deformation of directionally solidified Al2O3/Er3Al5O12 [J].

Fernandez, JM ;

Sayir, A ;

Farmer, SC .

ACTA MATERIALIA, 2003, 51 (06) :1705-1720

[10]

Flemings M. C., 1974, SOLIDIFICATION PROCE

← 1 2 3 4 5 →